LOST JEEPS :: View topic

thanks!, do I need to use those bolts or can I got to a hardware store and buy some bolts that will fit? b/c Im wanting grade 5 or maybe 8

Any appropriately sized and threaded bolts will due. Don't go crazy on the strength of the bolts. Nutzerts are made out a brass and are very soft. They will fail WAY before even normal grade bolts will.

jsc7002 wrote:

thanks!, do I need to use those bolts or can I got to a hardware store and buy some bolts that will fit? b/c Im wanting grade 5 or maybe 8

Cobolt-60 wrote:

jsc7002 wrote:

thanks!, do I need to use those bolts or can I got to a hardware store and buy some bolts that will fit? b/c Im wanting grade 5 or maybe 8

The outer casing that holds the nutzerk in is brass,the treaded part is grade 8 strength or metric 10.9.The OEM nutzerks are metric and require metric bolts that should be at least 9.8(10.9 would be better) in hardness for skid plate duty.8.8 metric bolts are about the same as grade 5 SAE bolts for strength.

tjkj2002 wrote:

Very interesting. The bolts I got with my rivets (or nutzerts - whatever) had 10.9 written on them. Got these from the dealership. Paid plenty to get them. Hope they last. Will kill if they don't.

The dealers almost NEVER carry nutzers and in many cases have trouble getting them from Mopar.

Buy them from NewJeepParts.com

The part # for the Nutzert is 6506644AA and for the Bolts is 6506027AA.

Price should be $0.96 and $1.20 each, respectively.

I got this from the email I sent the Part Dept at my local dealer:
The parts would need to be ordered and prepaid.

Nutzert (6506644AA) 1.28 each

Bolts (6506027AA) 1.61 each.

Allow 2 to 3 business days for arrival of shippment.

What is the cost of shipping from that newjeepparts.com?

if they are just the things to install like you use on the skid nutzerts I have two or three here, could send you one!

Author:	jsc7002 [ Thu Feb 14, 2008 5:15 pm ]
Post subject:	Nutserts
Where can I get some nutserts? and what size do I need? (for the stock rock rails) and does anyone know where I can get a U-Bolt latch?

Author:	BeepBeepJeepJeep [ Thu Feb 14, 2008 6:27 pm ]
Post subject:
I cannot answer your first question, but by U-Bolt latch do you mean this? http://www.quadratec.com/products/92144_101.htm

Author:	jsc7002 [ Thu Feb 14, 2008 6:57 pm ]
Post subject:
no I need something like this (its really called a pull-action latch clamp): http://www.wttool.com/product-exec/prod ... Type_Clamp lol thanks for helping me find it! now I just need some nutserts...

Author:	bbo [ Thu Feb 14, 2008 9:43 pm ]
Post subject:
you should be able to get nutzerts at the dealer one size fits all call ahead to make sure they have them in stock

Author:	Cobalt-60 [ Fri Feb 15, 2008 11:37 am ]
Post subject:
The dealers almost NEVER carry nutzers and in many cases have trouble getting them from Mopar. Buy them from NewJeepParts.com The part # for the Nutzert is 6506644AA and for the Bolts is 6506027AA. Price should be $0.96 and $1.20 each, respectively.

LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/

Nutserts http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=29498	Page 1 of 2

Author:	jsc7002 [ Fri Feb 15, 2008 12:35 pm ]
Post subject:
thanks!, do I need to use those bolts or can I got to a hardware store and buy some bolts that will fit? b/c Im wanting grade 5 or maybe 8

Author:	Cobalt-60 [ Fri Feb 15, 2008 12:44 pm ]
Post subject:
jsc7002 wrote: thanks!, do I need to use those bolts or can I got to a hardware store and buy some bolts that will fit? b/c Im wanting grade 5 or maybe 8 Any appropriately sized and threaded bolts will due. Don't go crazy on the strength of the bolts. Nutzerts are made out a brass and are very soft. They will fail WAY before even normal grade bolts will.

Author:	Uffe [ Fri Feb 15, 2008 1:37 pm ]
Post subject:
Cobolt-60 wrote: Any appropriately sized and threaded bolts will due. Don't go crazy on the strength of the bolts. Nutzerts are made out a brass and are very soft. They will fail WAY before even normal grade bolts will. I second that. Got some installed with the KJ armor and when you got one of those nutserts in your hand you'll not question which part will fail first...

Author:	WoodysKJ [ Fri Feb 15, 2008 3:15 pm ]
Post subject:
Grainger supply has a big selection of Nutzerts. and the tools to install them. http://www.grainger.com/Grainger/items/5RB35

Author:	tjkj2002 [ Fri Feb 15, 2008 3:21 pm ]
Post subject:
Cobolt-60 wrote: jsc7002 wrote: thanks!, do I need to use those bolts or can I got to a hardware store and buy some bolts that will fit? b/c Im wanting grade 5 or maybe 8 Any appropriately sized and threaded bolts will due. Don't go crazy on the strength of the bolts. Nutzerts are made out a brass and are very soft. They will fail WAY before even normal grade bolts will. The outer casing that holds the nutzerk in is brass,the treaded part is grade 8 strength or metric 10.9.The OEM nutzerks are metric and require metric bolts that should be at least 9.8(10.9 would be better) in hardness for skid plate duty.8.8 metric bolts are about the same as grade 5 SAE bolts for strength.

Author:	WoodysKJ [ Fri Feb 15, 2008 3:28 pm ]
Post subject:
tjkj2002 wrote: Cobolt-60 wrote: jsc7002 wrote: thanks!, do I need to use those bolts or can I got to a hardware store and buy some bolts that will fit? b/c Im wanting grade 5 or maybe 8 Any appropriately sized and threaded bolts will due. Don't go crazy on the strength of the bolts. Nutzerts are made out a brass and are very soft. They will fail WAY before even normal grade bolts will. The outer casing that holds the nutzerk in is brass,the treaded part is grade 8 strength or metric 10.9.The OEM nutzerks are metric and require metric bolts that should be at least 9.8(10.9 would be better) in hardness for skid plate duty.8.8 metric bolts are about the same as grade 5 SAE bolts for strength. is it just me or what? GOD i am glad he didn't go to Iraq again.

Author:	tonycrd [ Fri Feb 15, 2008 3:55 pm ]
Post subject:
X2

Author:	Uffe [ Fri Feb 15, 2008 7:15 pm ]
Post subject:
tjkj2002 wrote: The outer casing that holds the nutzerk in is brass,the treaded part is grade 8 strength or metric 10.9.The OEM nutzerks are metric and require metric bolts that should be at least 9.8(10.9 would be better) in hardness for skid plate duty.8.8 metric bolts are about the same as grade 5 SAE bolts for strength. Very interesting. The bolts I got with my rivets (or nutzerts - whatever) had 10.9 written on them. Got these from the dealership. Paid plenty to get them. Hope they last. Will kill if they don't.

Author:	tjkj2002 [ Fri Feb 15, 2008 7:25 pm ]
Post subject:
Uffe wrote: tjkj2002 wrote: The outer casing that holds the nutzerk in is brass,the treaded part is grade 8 strength or metric 10.9.The OEM nutzerks are metric and require metric bolts that should be at least 9.8(10.9 would be better) in hardness for skid plate duty.8.8 metric bolts are about the same as grade 5 SAE bolts for strength. Very interesting. The bolts I got with my rivets (or nutzerts - whatever) had 10.9 written on them. Got these from the dealership. Paid plenty to get them. Hope they last. Will kill if they don't. Metric 10.9 bolts are as strong if not a little stronger then SAE grade 8 bolts,there plenty strong and why they cost more then lesser grade bolts of the same size.

Page 1 of 2	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/

Author:	Albert [ Fri Feb 15, 2008 8:15 pm ]
Post subject:
Cobolt-60 wrote: The dealers almost NEVER carry nutzers and in many cases have trouble getting them from Mopar. Buy them from NewJeepParts.com The part # for the Nutzert is 6506644AA and for the Bolts is 6506027AA. Price should be $0.96 and $1.20 each, respectively. This is true. The dealer did not have them but they order parts every day for repairs and such and I had them the next morning via the parts truck. They can get MOST things in 1 day that I ask for. (I think there is a warehouse downstate in Albany) They were priced as noted by cobalt60. At least that is my experience also.

Author:	Blue KJ in PA [ Sat Feb 16, 2008 11:54 am ]
Post subject:
I got this from the email I sent the Part Dept at my local dealer: The parts would need to be ordered and prepaid. Nutzert (6506644AA) 1.28 each Bolts (6506027AA) 1.61 each. Allow 2 to 3 business days for arrival of shippment. What is the cost of shipping from that newjeepparts.com?

Author:	Cobalt-60 [ Sat Feb 16, 2008 11:59 am ]
Post subject:
Blue KJ in PA wrote: I got this from the email I sent the Part Dept at my local dealer: The parts would need to be ordered and prepaid. Nutzert (6506644AA) 1.28 each Bolts (6506027AA) 1.61 each. Allow 2 to 3 business days for arrival of shippment. What is the cost of shipping from that newjeepparts.com? I don't remember, I got them as part of an order with 4 extra rear upper spring isolators and some other misc stuff.

Author:	jsc7002 [ Thu Feb 28, 2008 2:20 pm ]
Post subject:
I finally got the nutzerts, paid $1.26 or whatever they were, looked at the bill and they charged me $10 for shipping! so I ended up paying $32 for the darn things do you have to have the install kit? or is there a way I can install them w/o the kit?

Author:	tommudd [ Thu Feb 28, 2008 5:13 pm ]
Post subject:
if they are just the things to install like you use on the skid nutzerts I have two or three here, could send you one!

Author:	jsc7002 [ Thu Feb 28, 2008 10:22 pm ]
Post subject:
tommudd wrote: if they are just the things to install like you use on the skid nutzerts I have two or three here, could send you one! I dont know how to install them lol I just remember seeing somewhere a nutzert install kit, if you would be willing to send me one that would be awesome!