| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| trutrac question http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=29514 |
Page 1 of 1 |
| Author: | andy.caylor [ Thu Feb 14, 2008 11:06 pm ] |
| Post subject: | trutrac question |
What size trutrac would I need for my liberty. If anyone could provide a part number or more details that would be great. |
|
| Author: | jason thompson [ Thu Feb 14, 2008 11:09 pm ] |
| Post subject: | Re: trutrac question |
andy.caylor wrote: What size trutrac would I need for my liberty. If anyone could provide a part number or more details that would be great.
front or rear? Rear you need the one for a Chrysler 8.25 with 3.73 gears front you need the one for a Dana 30 with 3.73 gears |
|
| Author: | InCommando [ Thu Feb 14, 2008 11:27 pm ] |
| Post subject: | |
For the rear, get the 29-spline version, not the 27. |
|
| Author: | ohv_kj [ Fri Feb 15, 2008 1:10 am ] |
| Post subject: | |
the only locker i found to fit into the front Dana 30a is an ARB...but yes a 29 spline for a Chrysler 8.25 3.73 gears i beleive |
|
| Author: | spoonplugger1 [ Fri Feb 15, 2008 1:53 am ] |
| Post subject: | |
The TruTrac 30 diff works fine up front, the only difference between the 30s in the length of the pinion gear shaft. |
|
| Author: | Wasatch15 [ Fri Feb 15, 2008 8:50 am ] |
| Post subject: | |
I installed one in the Dana 30A and it works great. You can get one from Quinn at All J Products he sold me the one I installed. I also purchased new bearings and shims from Randy's Ring and Pinion. Both places are great to work with. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|