The one word of advice I would give is -- GET AN ANGLE DRILL!!!!
It will make your life much simplier...
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Request: Install instructions for sliders http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=29530 |
Page 1 of 1 |
| Author: | Jeep4me99 [ Fri Feb 15, 2008 1:52 pm ] |
| Post subject: | Request: Install instructions for sliders |
Need install instructions for sliders, i'm getting rustys, but i any company's instructions would help... thanks |
|
| Author: | 0311_DoC [ Fri Feb 15, 2008 3:40 pm ] |
| Post subject: | |
go to rock lizzards site he has them on there or even All J's I think lists them for the boulder bars |
|
| Author: | Cobalt-60 [ Fri Feb 15, 2008 4:08 pm ] |
| Post subject: | |
The one word of advice I would give is -- GET AN ANGLE DRILL!!!! It will make your life much simplier...
|
|
| Author: | LostEddie [ Fri Feb 15, 2008 4:30 pm ] |
| Post subject: | |
Lots of info and link to instructions here. http://www.lostjeeps.com/forum/phpBB3/vie ... ht=#277248 Good luck. |
|
| Author: | Jeep4me99 [ Fri Feb 15, 2008 8:44 pm ] |
| Post subject: | |
Thanks! |
|
| Author: | dloc_jeep_KJ [ Sat Feb 16, 2008 1:05 am ] |
| Post subject: | |
get really good drill bits!!!! |
|
| Author: | jsc7002 [ Sat Feb 16, 2008 1:23 am ] |
| Post subject: | |
colbat dits, not the cheapest things but they will make it go quick! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|