New Bumper!!!!

Get Serious Off Road · **Posted:** Wed Feb 13, 2008 1:14 am

Hey guys, I have a new bumper for you all to check out. Let me know what you think about it. This is my first post with this new name, been here in the past... the old web page. If anyone is interested in the bumper let me know. I dont have an exact price as of yet, but i am in the process of working that out as well as lead time on production of them. Let me know fellas.
Thanks
Rudy

Diggerfreek · **Posted:** Wed Feb 13, 2008 1:20 am

I found the correct link to use for you

Get Serious Off Road · **Posted:** Wed Feb 13, 2008 1:29 am

Thanks, dont remeber how to do all this stuff. A little bit rusty... lol

Diggerfreek · **Posted:** Wed Feb 13, 2008 1:30 am

no prob...

KJ4ME · **Posted:** Wed Feb 13, 2008 2:01 am

another bumper developed for 02-04 model years... woohoo :roll:

what are you developing for 05 and newer kjs??

Get Serious Off Road · **Posted:** Wed Feb 13, 2008 2:11 am

The bumper should be fine for 02-07 its just a matter of getting the corners of the frame covered the right way. I havent seen a 05 or newer jeep with the plastic off of them so cant say for sure. I am looking into that though, if I can get some pics of them that would help out.

If you would like to see more pics I got a few more at www.suvworld.com/jptuky they are the 4 newest ones.

CD · **Posted:** Wed Feb 13, 2008 5:57 am

Not bad GSOR, I like your rear bumper & swing away.

Blue KJ in PA · **Posted:** Wed Feb 13, 2008 8:40 am

Nice...

wildrussian · **Posted:** Wed Feb 13, 2008 8:47 am

Looks good! Let us know when you figure out what the price going to be!

WoodysKJ · **Posted:** Wed Feb 13, 2008 8:49 am

Forget the front bumper, I want more info on the rear and the swing. There are a bunch of front bumpers. That rear looks very promising.

Love the aux. back-up lights. I WANT MORE PICS AND INFO on the rear bumper.

Does the KJ have the articulation neccessary to be able to use the front stinger bumper?

kolesy · **Posted:** Wed Feb 13, 2008 8:59 am

The rear bumper is a Trail Ready aint it?

WoodysKJ · **Posted:** Wed Feb 13, 2008 9:12 am

I don't think it is. It is better looking that a TR, plus no TR on the sides and TR doesn't have the back-up lights, i think.

tommudd · **Posted:** Wed Feb 13, 2008 10:09 am

OK have to agree with woodys :twisted:

its not a TR bumper, its a knock off of theirs for sure with the light guard, but his has a cut out for the spare which the TR doesnt , plus back up lights are different etc. No prices on anything ????

meh_kick · **Posted:** Wed Feb 13, 2008 10:38 am

Good stuff! I especially like that skid that runs all the way to the bumper.

Also, it doesn't appear to have as much plate steal to weigh it down... I'm guessing the weight is way below 100lbs.

tommudd · **Posted:** Wed Feb 13, 2008 10:46 am

like the skid in one way but another it looks like it maybe bad if pulling up to a set of steps, may limit it a bit,??? kind of hard to tell for sure but thats why I did mine the way I did as to do have anything in the way. Also turn signals in a better location,
like the door mounted lights :wink:

PaU-MWolverine · **Posted:** Wed Feb 13, 2008 11:41 am

That bumper looks pretty nice! Looking forward to seeing a price!

jsc7002 · **Posted:** Wed Feb 13, 2008 11:43 am

it looks a lot like TR but its definetly not, looks real good though, how does the swing stay in place?

Get Serious Off Road · **Posted:** Wed Feb 13, 2008 12:18 pm

Thanks guys, for right now the price is around 950. I know its a bit pricy but that is what the owner wants to charge till there is enough demand. That rear bumper is not a TR, and also that isnt looking to be one to be made unless there is a lot of buyers. If anyone is interested in that I can try and work something out on it. The reason I had this one made (front) is to cut down on the weight. right on the money meh-kick, no where near what the original weighed. There is no prob. with steps, where I work, I can climb them and the bumber clears pretty good. I will get pics for ya. I am looking also into getting those door mounts made to sell also, as well as a bunch more ideas I have.
Thanks Guys

Maximum Carnage · **Posted:** Wed Feb 13, 2008 12:43 pm

$950

I need to get myself a welder...

Nice looking bumper though especially the rear

WoodysKJ · **Posted:** Wed Feb 13, 2008 12:49 pm

950 for a tube bumper?!?!?!

WOW

Guess it will be a stupid question to even ask about the rear one even if he does want to make more.

New Bumper!!!!

Who is online