I'm trying to change the tweeters in a 03 Liberty, how I can't seem to be able to remove the dash. Does anyone out there know how to remove the dash?

Remove the pillar handles first and the pillar shields afterwards. You need a screwdriver to remove the handles. Can't remember if it's a torx, star or flat.

Then just pry open the top dash trim panel with a screwdriver covered with soft stuff, like tape. Don't damage your top dash.

_________________
L.O.S.T forever!
Silver 2002 Skoda Fabia TDI, 235,000km
Former car: Jeep KJ 2003 CRD

DIESEL - saving millions of liters of petrol every day!

you will need to remove the A-pillar covers to get in there. On the handles there are two plugs. Pull those out then use a torx bit to take out the two bolts, pop the covers off, then you can take off the top of the dash to get to the tweets. Pop up that front part, it is held in place with some clips, then pull the plastic piece forward.

_________________
L.O.S.T. #225019
2003 Sport 4x4
Patriot Blue w/ trail rash
Flex-Zilla 4" Lift
TrailRash hi-lift mounts
Other stuff you wish you had

so what tweeters did you get? I need to replace mine as well

_________________
1980 Jeep CJ7 Buggy
SOA, D44/ FF14B, SBC 350, SM465, NP205, 108" WB, 37" MTs

http://www.dpgoffroad.com/
http://www.ucora.org/
http://www.christianoffroad.com/
http://jeepinbyal.com/