they made the same mistake that Jeepin By Al did initially. The part number on there is the same as for the XJ D30. They are not realizing that the KJ doesnt have a D30, it has a D30a, and they're not interchangeable.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Aussie Locker for D30A http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=29965 |
Page 1 of 1 |
| Author: | InCommando [ Thu Feb 28, 2008 6:22 pm ] |
| Post subject: | Aussie Locker for D30A |
http://www.offroadlockers.com/make.php/ ... 9/10/.html It is listed for the KJ. Any thoughts? |
|
| Author: | jerbacher [ Thu Feb 28, 2008 6:47 pm ] |
| Post subject: | |
they made the same mistake that Jeepin By Al did initially. The part number on there is the same as for the XJ D30. They are not realizing that the KJ doesnt have a D30, it has a D30a, and they're not interchangeable.
|
|
| Author: | tommudd [ Thu Feb 28, 2008 6:59 pm ] |
| Post subject: | |
yes they messed up, common mistake it seems unless of course you belong to LOST then you are in the know! 
|
|
| Author: | _UnLiMiTeD_ [ Thu Feb 28, 2008 7:08 pm ] |
| Post subject: | |
im emailing them now so they take that off and dont waste a unknown liberty owners time in taking it all apart to find out it doesnt fit. |
|
| Author: | tjkj2002 [ Thu Feb 28, 2008 7:58 pm ] |
| Post subject: | Re: Aussie Locker for D30A |
InCommando wrote: http://www.offroadlockers.com/make.php/TMc4276e/2c69/10/.html That Aussie locker will fit in the D30A,the D30A just uses a longer pinion shaft,but the same ring gear and carrier as a regular D30.
It is listed for the KJ. Any thoughts? With saying that you wouldn't want to use it in the D30A,since it is a lunch box locker it will place to much stress on the alloy housing not to mention the damage it will do to your front tires since the KJ doesn't have unlockable hubs. |
|
| Author: | InCommando [ Thu Feb 28, 2008 8:12 pm ] |
| Post subject: | |
I wondered. I have heard that Aussie is the best of th elunch-box lockers, though. |
|
| Author: | tjkj2002 [ Thu Feb 28, 2008 8:16 pm ] |
| Post subject: | |
InCommando wrote: I wondered. I have heard that Aussie is the best of th elunch-box lockers, though. Yes they are but will be very bad in the D30A.
|
|
| Author: | ohv_kj [ Thu Feb 28, 2008 10:45 pm ] |
| Post subject: | Re: Aussie Locker for D30A |
tjkj2002 wrote: InCommando wrote: http://www.offroadlockers.com/make.php/TMc4276e/2c69/10/.html That Aussie locker will fit in the D30A,the D30A just uses a longer pinion shaft,but the same ring gear and carrier as a regular D30.It is listed for the KJ. Any thoughts? With saying that you wouldn't want to use it in the D30A,since it is a lunch box locker it will place to much stress on the alloy housing not to mention the damage it will do to your front tires since the KJ doesn't have unlockable hubs. would it not matter if ther is no torqe in 2wd? just watch the skinny when in 4wd? |
|
| Author: | DaveKJ02 [ Fri Feb 29, 2008 8:51 pm ] |
| Post subject: | |
tommudd wrote: yes they messed up, common mistake it seems unless of course you belong to LOST then you are in the know!
|
|
| Author: | raceinfan [ Fri Feb 29, 2008 10:55 pm ] |
| Post subject: | |
I'm locking this post due to we have 2 going at the same time for the same AUSSIE LOCKER...please just stick with one thread THANKS...PETE |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|