| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Frankenlift spacer! http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=31026 |
Page 1 of 1 |
| Author: | renegadekj [ Sat Mar 29, 2008 4:26 pm ] |
| Post subject: | Frankenlift spacer! |
What is the rubber spacer that AllJ's use in the frankenlift? Is it a daysatr spacer and what size is it? And correct me if I'm wrong but if you use this spacer then you need the daysar upper strut mounts? Ive been looking into doing "something" to the KJ and it may consist of a higher lift! Ive looked on the daysar website and notice this spacer: http://www.daystarweb.com/ItemForm.aspx ... 49ccf0f306 If i used this would i need the daystar strut mounts? What kind of feedback can you guys give me if i used this 1.5" spacer with my OME lift? Ive been noticing that the OME med springs have been sagging Josh |
|
| Author: | Jeep4me99 [ Sat Mar 29, 2008 5:34 pm ] |
| Post subject: | |
that would be it. a .75 inch spacer. I have a rusty's one and the daystar upper strut plate. used the struts from my crusty's lift and bought OME HD's from ok4wd.com |
|
| Author: | renegadekj [ Sat Mar 29, 2008 5:38 pm ] |
| Post subject: | |
Does the .75" spacer look the same as the one i posted above?Just a different size. Josh |
|
| Author: | Jeep4me99 [ Sat Mar 29, 2008 6:33 pm ] |
| Post subject: | |
yup. a .75 inch spacer gives 1.5 inches of lift. the one's from crusty's are $20 each i think |
|
| Author: | tjkj2002 [ Sat Mar 29, 2008 6:50 pm ] |
| Post subject: | Re: Frankenlift spacer! |
renegadekj wrote: What is the rubber spacer that AllJ's use in the frankenlift? Is it a daysatr spacer and what size is it? And correct me if I'm wrong but if you use this spacer then you need the daysar upper strut mounts? Ive been looking into doing "something" to the KJ and it may consist of a higher lift! Ive looked on the daysar website and notice this spacer: http://www.daystarweb.com/ItemForm.aspx ... 49ccf0f306 The spacer in the Frankinlift is a special made spacer for AllJ's,it is not made by Rusty's or Daystar.
If i used this would i need the daystar strut mounts? What kind of feedback can you guys give me if i used this 1.5" spacer with my OME lift? Ive been noticing that the OME med springs have been sagging Josh |
|
| Author: | RAYMAN975 [ Sat Mar 29, 2008 7:51 pm ] |
| Post subject: | |
isnt it special made because doesnt it have that bumpstop thingy that hits the balljoint boot, "built in" to the spacer? where people usually had the piece of rubber hose-clamped onto the shock? but is the actual 3/4" spacer dimension the same? |
|
| Author: | Jeepjeepster [ Sat Mar 29, 2008 8:00 pm ] |
| Post subject: | |
I believe it was Eddo that said he held the spacer from the Franken lift and the .75in spacer from rustys side by side and said they were identical. |
|
| Author: | renegadekj [ Sat Mar 29, 2008 8:48 pm ] |
| Post subject: | |
Thanks for the help guys! Will order the spacer and the strut mounts this week. Josh |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|