LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Thickness of Sway Bar
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=31230		 Page 1 of 1
Author:  jeepkj02 [ Fri Apr 04, 2008 8:05 pm ]
Post subject:  Thickness of Sway Bar
Anyone know what the diameter of the stock front sway bar? Maybe someone with a micrometer can measure it? Thanks. :D
Author:  Dje Ryu [ Fri Apr 04, 2008 9:34 pm ]
Post subject: 
My mics are at work but, I have to stop there for air before I head out of town tomorrow. I'll try to get the measurements posted by tomorrow night. Assuming I remember to actually measure it.
Author:  jeepkj02 [ Fri Apr 04, 2008 10:07 pm ]
Post subject: 
Dje Ryu wrote:
My mics are at work but, I have to stop there for air before I head out of town tomorrow. I'll try to get the measurements posted by tomorrow night. Assuming I remember to actually measure it.


Thanks, really appreciate it! :)
Author:  jeepkj02 [ Sun Apr 06, 2008 10:24 am ]
Post subject: 
Friendly bump... :)
Author:  Dje Ryu [ Sun Apr 06, 2008 4:41 pm ]
Post subject: 
Sorry about that. I wound up staying out of town, overnight. Good news is that I did remember to measure it though! 1.21875", which is 1 7/32"
Author:  jeepkj02 [ Sun Apr 06, 2008 4:47 pm ]
Post subject: 
Thanks so much. :D
Author:  Dje Ryu [ Sun Apr 06, 2008 4:56 pm ]
Post subject: 
no problem
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/