LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Jeepin Als UCA's and no lift!
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=31314
Page 1 of 1

Author:  kj lad [ Mon Apr 07, 2008 4:49 pm ]
Post subject:  Jeepin Als UCA's and no lift!

Well, having problems with my cv joints and decided it could be lift related so I took out my daystar lift kit and ordered a set of OME springs to change the cv angles.

How long can I drive with the Jeepin als UCAs without a lift before I cause other problems and what problems will it cause?

Cheers,

Ian

Author:  Jeep4me99 [ Mon Apr 07, 2008 5:46 pm ]
Post subject: 

your aligment must be out pretty bad....thats not gonna take too long to mess up your meats.

Author:  tommudd [ Mon Apr 07, 2008 8:10 pm ]
Post subject: 

if you took the lift off your alignment is way off and will just chew the tires off in no time as jeep4me said.

Author:  kj lad [ Thu Apr 10, 2008 3:17 pm ]
Post subject: 

Does this mean I'm putting undue stress on the steering and suspension?I'm a little concerned because this Jeep is used by wife to pick up my son. It's going to take about four weeks to get my suspension.

Ian

Author:  Jeepjeepster [ Thu Apr 10, 2008 4:38 pm ]
Post subject: 

Not really. It will wear out the tires though.

Would it be possible to get an alignment? Tell them the situation because they will not be able to get the chamber 100% with the upper arms but should be able to get the tow set.

Author:  Jeep4me99 [ Thu Apr 10, 2008 5:40 pm ]
Post subject: 

how does the steering feel, i figure it must be a bit squirelly since you are driving on more of the edge of the tire instead of all the tread. In emergency situations that will really affect the handeling.

Author:  kj lad [ Sat Apr 12, 2008 4:13 pm ]
Post subject: 

The steering is actually tighter than it's every been! That maybe down to toe being out? Back on stock wheels and tyres so not too bothered about them. Will put the 255/70's back on when the OME kit arrives. Thanks for re-assurances though guys.

Ian

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/