First time I used a utility knife. Second time I used a tin shears, liked that better. I also have the liner cut to just above my fog lights. Joe
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| 05-07 KJ Front air-dam trimmers unite http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=31610 |
Page 1 of 2 |
| Author: | dog_party [ Wed Apr 16, 2008 2:46 pm ] |
| Post subject: | 05-07 KJ Front air-dam trimmers unite |
Who has trimmed that excess front-end plastic off their 05-07 KJ? How did you do it? What problems did you encounter? Did you completely remove the fender-well liners, or trim them too? How did you connect across the fender (straight cut, angled cut)? Did you remove the bumper to do the work, or cut it while the bumper was attached? I have seen a few threads where people talked about doing it, but I thought it might be nice to have a bunch of stories, options, and ideas all in one place. |
|
| Author: | JL Rockies [ Wed Apr 16, 2008 3:21 pm ] |
| Post subject: | |
I had to trim the air dam when I put on 32" tires. I used an air saw to trim it and the front of the fender liner. I've had no problems. |
|
| Author: | bugnout [ Wed Apr 16, 2008 3:52 pm ] |
| Post subject: | |
I used a sharp knife. Started by cutting the air dam and the piece of plastic that its mounted too off between the two ends. Then trimmed the end caps on each side up to the fold and cut straight back about 1 1/2 under the marker lights on each side. Finally went into the wheel wells and trimmed them up until they cleared everything. Reused the replaceable rivets in each wheel well, just moved them up to capture the liner against the flair. |
|
| Author: | Joe Jeeper [ Wed Apr 16, 2008 6:08 pm ] |
| Post subject: | Air Dam |
First time I used a utility knife. Second time I used a tin shears, liked that better. I also have the liner cut to just above my fog lights. Joe
|
|
| Author: | Fulltimer [ Wed Apr 16, 2008 7:14 pm ] |
| Post subject: | |
I took off the air dam and removed the fender liners in the front. I also made a brace that I attached to the bumper under the side marker light. I did this because things looked a little loose. I used a small tree limb saw for the cutting! It made a ruff cut but I ordered a steel bumper so it really didn't matter. Terry 
|
|
| Author: | DryBones [ Wed Apr 16, 2008 8:42 pm ] |
| Post subject: | |
Terry, I am not sure I will be as brave as you on that cut! maybe if I get a new bumper it won't matter then! BTW, it looks from the pic like your tires are wearing on the inside edges. |
|
| Author: | riptricket [ Wed Apr 16, 2008 9:08 pm ] |
| Post subject: | |
man i wish i had those in-grille fog lights. when i order my new bumper, probably SC's, i'll only have 2 more sets of lights and i'll lose my big fogs. 
|
|
| Author: | durangotang [ Thu Apr 17, 2008 6:31 pm ] |
| Post subject: | |
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=30470 |
|
| Author: | Fulltimer [ Thu Apr 17, 2008 7:04 pm ] |
| Post subject: | |
DryBones wrote: Terry,
I am not sure I will be as brave as you on that cut! maybe if I get a new bumper it won't matter then! BTW, it looks from the pic like your tires are wearing on the inside edges. Must be the lighting or something. I check and they are wearing even. Thanks for watching out for a fellow Dark Khaki KJ! Terry |
|
| Author: | Dje Ryu [ Thu Apr 17, 2008 9:23 pm ] |
| Post subject: | |
I just used a utility knife, made a few light cuts and snapped off right where I'd cut. Came out really clean, other than the tow hook cut-outs that I just cut all the way through in a hurry. Still need to clean those up. 
|
|
| Author: | kolesy [ Thu Apr 17, 2008 9:43 pm ] |
| Post subject: | |
I used my handy dandy dremel with a small cut off wheel on it and it sliced right through like butter. I will get pics and post em up tom. I have soem on here somewhere but I just did a bit more trimming before our Carolina LOST run this past weekend. Mike |
|
| Author: | Inc [ Thu Apr 17, 2008 10:30 pm ] |
| Post subject: | |
Dje Ryu wrote: I just used a utility knife, made a few light cuts and snapped off right where I'd cut. Came out really clean, other than the tow hook cut-outs that I just cut all the way through in a hurry. Still need to clean those up.
Do you have a side view of your bumper? I want to do this, but I have no idea what it will look like from a side view. You too fulltimer! Side views would be great. 
|
|
| Author: | Dje Ryu [ Thu Apr 17, 2008 11:39 pm ] |
| Post subject: | |
the color is messed up from my son dropping my old camera in mud/snow and me not realizing it for awhile but, here ya go: 
|
|
| Author: | Inc [ Thu Apr 17, 2008 11:49 pm ] |
| Post subject: | |
Cool, thanks Dje Ryu. I can't decide if I wanna go that route or not. I just bought some 31X10.5X15 Trxus tires and they will be going on shortly (still need the lift but couldn't pass up a good deal on the tires) and I guess I'll have to see how they fit first. I imagine they will rub up front (I have already bashed down the pinch weld) but I hope not. |
|
| Author: | Dje Ryu [ Fri Apr 18, 2008 12:00 am ] |
| Post subject: | |
15" rims? You'll need to worry more about those rubbing on the rotors. Although, you'll probably have rubbing in the front, as well, even if you find rims that fit. |
|
| Author: | Inc [ Fri Apr 18, 2008 12:02 am ] |
| Post subject: | |
Dje Ryu wrote: 15" rims? You'll need to worry more about those rubbing on the rotors. Although, you'll probably have rubbing in the front, as well, even if you find rims that fit.
I checked around and people said the rims would be fine. I hope they were right. |
|
| Author: | Dje Ryu [ Fri Apr 18, 2008 12:08 am ] |
| Post subject: | |
edited last post to show fender liner and how I re-used one of the plastic rivets for stability. I also heat-gunned a bit for a little extra clearance. I'm definitely going to a true 31" next time I need tires. |
|
| Author: | Inc [ Fri Apr 18, 2008 12:11 am ] |
| Post subject: | |
Are you running the rubicon wranglers on moabs? 245/75/16 or something like that? |
|
| Author: | Dje Ryu [ Fri Apr 18, 2008 12:12 am ] |
| Post subject: | |
incubusmike wrote: Dje Ryu wrote: 15" rims? You'll need to worry more about those rubbing on the rotors. Although, you'll probably have rubbing in the front, as well, even if you find rims that fit. I checked around and people said the rims would be fine. I hope they were right. What rims are you looking at? |
|
| Author: | Dje Ryu [ Fri Apr 18, 2008 12:13 am ] |
| Post subject: | |
LT 245/75R16 MTR's on Soft 8's. Most of the pics in my sig are LT 245/70R17 Silentarmors on the stock 17" limited alloys. |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|