Good Post!
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| some very good specs and torque setting for us wrenchers http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=31689 |
Page 1 of 1 |
| Author: | dieselndixie [ Sat Apr 19, 2008 11:50 pm ] |
| Post subject: | some very good specs and torque setting for us wrenchers |
stumbled on this, may be old news, may be the best thing since sliced bread....either way, here goes. http://en.wikibooks.org/wiki/Jeep_Liber ... cket_Sizes Engine Socket Size / Torque Spec Battery Terminal Clamps 10mm 6 lbs-ft Engine Pan Drain Plug 13mm 25 lbs-ft Engine Skid 15mm Deep Socket 45 lbs-ft Ignition Coil Mounting Nut 10mm 6 lbs-ft Spark Plugs 5/8" Spark Plug Socket 20 lbs-ft Tensioner Pulley 15mm Thermostat Housing Bolts --mm 9 lbs-ft Water Pump Bolts --mm 40 lbs-ft Steering Socket Size Torque Spec Rack & Pinion Frame Mount --mm 120 lbs-ft Rack & Pinion Intermediate Shaft Bolt --mm 36 lbs-ft Power Steering Pressure Line --mm 25 lbs-ft Power Steering Return Line --mm 25 lbs-ft Tie Rod End Knuckle Nut --mm 80 lbs-ft Tie Rod End Jam Nut --mm 55 lbs-ft Front Differential/Suspension Socket Size Torque Spec Front Axle Hub Nut 35mm 100 lbs-ft Front Ball Joint Nut (Upper) 21mm 60 lbs-ft Front Ball Joint Nut (Lower) 21mm 60 lbs-ft Front Clevis Bolt (Upper) 21mm 100 lbs-ft Front Clevis Bolt (Lower) 21mm 100 lbs-ft Front Control Arm (Upper) 18mm 80 lbs-ft Front Control Arm (Lower) 19mm & 24mm 120 lbs-ft Front Differential Bearing Cap Bolts --mm 47-67 lbs-ft Front Differential Drain Hole 8mm Allen Wrench 15 lbs-ft Front Differential Fill Hole 3/8" Ratchet 15 lbs-ft Front Differential Pinion Nut --mm 200 lbs-ft Front Differential Ring Gear Bolts --mm 95-105 lbs-ft Front Shock/Strut Mounting Nuts --mm 80 lbs-ft Front Sway Bar Bushing Mount 18mm 110 lbs-ft Front Sway Bar End Link Bolt (Upper) 15mm 100 lbs-ft Front Sway Bar End Link Nut(Upper) 18mm 100 lbs-ft Front Sway Bar End Link (Lower) 18mm 85 lbs-ft Rear Differential/Suspension Socket Size Torque Spec Rear Ball Joint Bracket Bolts --mm 100 lbs-ft Rear Ball Joint Nut --mm 70 lbs-ft Rear Control Arm (Lower) --mm 120 lbs-ft Rear Control Arm/Tri-Link Bolts (Upper) --mm 74 lbs-ft Rear Differential Bearing Cap Bolts --mm 100 lbs-ft Rear Differential Cover Bolts 13mm 30 lbs-ft Rear Differential Pinion Nut 1-1/8" 210 lbs-ft Rear Differential Ring Gear Bolts --mm 70 lbs-ft Rear Shock Mount Bolt (Lower) 15mm 85 lbs-ft Rear Shock Mount Nut (Lower) 18mm 85 lbs-ft Rear Shock Mount (Upper) 15mm 80 lbs-ft Rear Sway Bar Bolts --mm 73 lbs-ft Rear U-Joint Strap 8mm 13 lbs-ft Transmission/Transfer Case Socket Size Torque Spec Transfer Case Drain/Fill Hole 3/8" Allen 15-25 lbs-ft Transfer Case Skid (OEM) 15mm 25 lbs-ft Transmission Cover Bolts --mm 8-9 lbs-ft Transmission Skid (OEM) 15mm 45 lbs-ft Other Socket Size Torque Spec Front Tow Hook 15mm 45 lbs-ft Fuel Tank Skid 18mm 65 lbs-ft Lug Nuts 1/2" x 20 RH 85-110 lbs-ft Rear Tow Hook 18mm 65 lbs-ft Trailer Hitch Bolts 18mm 65 lbs-ft [/size][/color] |
|
| Author: | dieselenthusiast [ Sun Apr 20, 2008 1:43 am ] |
| Post subject: | |
Good Post!
|
|
| Author: | snowsport [ Sun Apr 20, 2008 9:44 am ] |
| Post subject: | |
Thanks! |
|
| Author: | kj924 [ Sun Apr 20, 2008 11:06 am ] |
| Post subject: | |
Thanks for that post. I was looking for torque specs to check my lift after install. 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|