| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Undercoating? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=33248 |
Page 1 of 1 |
| Author: | ObiHann [ Thu Jun 12, 2008 1:32 pm ] |
| Post subject: | Undercoating? |
Anyone ever get a rhino liner for there undercoating? I would think it would be the best for rust proofing, and overall safety? |
|
| Author: | ohv_kj [ Thu Jun 12, 2008 6:44 pm ] |
| Post subject: | |
i'll get you a pick but go to advance autoparts and get the dupli-color paintale bed under coating...it looks great...works well as a protective layer over your bodie and is marked well in price...it is a spray or roll on...get the spray.. |
|
| Author: | tjkj2002 [ Thu Jun 12, 2008 7:47 pm ] |
| Post subject: | |
ohv_kj wrote: i'll get you a pick but go to advance autoparts and get the dupli-color paintale bed under coating...it looks great...works well as a protective layer over your bodie and is marked well in price...it is a spray or roll on...get the spray.. And flakes off prety good after a short time of being applied,about 3 months.I know I did my wheel wells with the stuff,even properly preped the surface that I sprayed also  .
|
|
| Author: | Pablo [ Fri Jun 13, 2008 2:20 am ] |
| Post subject: | |
I used the duplicoat on the pinch weld. It does not stay put. At least it is cheap and the can will last for several applications. If you want to go cheap I would just use rustoleum and touch up as needed. Otherwise, line-x. |
|
| Author: | ObiHann [ Fri Jun 13, 2008 7:30 am ] |
| Post subject: | |
how difficult is it to apply this yourself? what do you need? Is a lift required? |
|
| Author: | tjkj2002 [ Fri Jun 13, 2008 9:36 am ] |
| Post subject: | |
ObiHann wrote: how difficult is it to apply this yourself? what do you need? Is a lift required? If you want a spray on bedliner applied to the undercarriage such as Line-X or Rhino Lining,you will need to remove the entire drivetrain and suspension and then take it to a shop that sprays the stuff and they will spray it and then you get to re-install everything.Rhino Lining and Line-X requires special equipment to spray and you'd have to buy a franchise to get the stuff to spray yourself.
You can take it to a dealership and have them spray on actual undercoating,the dealer I worked for charged $120 to undercoat a vehicle but in SD all new vehicles must be undercoated before being sold anyway. |
|
| Author: | bugnout [ Fri Jun 13, 2008 9:46 am ] |
| Post subject: | |
tjkj2002 What do you have on there now? It looks pretty good. How hard was it to spray? How's it holding up? |
|
| Author: | tjkj2002 [ Fri Jun 13, 2008 9:49 am ] |
| Post subject: | |
bugnout wrote: tjkj2002 What do you have on there now? It looks pretty good. How hard was it to spray? How's it holding up? As far as undercoating? I have Quaker State undercoating sprayed under my KJ,did it at the dealership that I worked on since I preped my KJ before I bought it.
The lower 1/3 and my roof is sprayed with Mortan's spray-on bedliner,I sprayed it myself,not hard just a little messy. |
|
| Author: | ObiHann [ Fri Jun 13, 2008 10:57 am ] |
| Post subject: | |
Dealer undercoating is my option I guess. All this hands on stuff is going to make my head explode! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|