LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Getting level with a OME lift?
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=33347
Page 1 of 1

Author:  loosvelt [ Sun Jun 15, 2008 11:41 pm ]
Post subject:  Getting level with a OME lift?

I want my KJ to sit level front and back when I lift it. If I am using OME HDs, and Rancho struts and shocks, what would I need to provide or tell my local shop to do?

Author:  jsc7002 [ Sun Jun 15, 2008 11:44 pm ]
Post subject: 

do a clevis lift, prolly 2 or 3 2" electrical conduit nuts on each side, on the bottom of the strut

Author:  tommudd [ Mon Jun 16, 2008 12:29 am ]
Post subject: 

if using Ranchos you need to slide two up over the little tabs on the side then add two more, you should be good then or at least thats how I started out :wink: and it was level

Author:  RAYMAN975 [ Mon Jun 16, 2008 5:04 pm ]
Post subject: 

on mine i have 1 extra isolator in the rear on each side, and in the front, my friend machined me a 3/8" x 3/8" ring that fits tightly around the shock bottom(clevis), im 99% positive the inside diameter was 2.2". it sits pretty darn level right now.

i put the clevis on while i did the lift, and the back was visibly lower the the front by about 1/2", i put the extra isolator in the rear and was amazed how much different that 1/2" made, now it looks great!

Author:  jerbacher [ Mon Jun 16, 2008 5:11 pm ]
Post subject: 

RAYMAN975 wrote:
now it looks great!


matter of opinion.... :wink: :lol: :lol:






j/k

Author:  tommudd [ Mon Jun 16, 2008 5:43 pm ]
Post subject: 

jerbacher wrote:
RAYMAN975 wrote:
now it looks great!


matter of opinion.... :wink: :lol: :lol:






j/k


I agree Jon :twisted: :twisted: :twisted:

Author:  RAYMAN975 [ Mon Jun 16, 2008 6:19 pm ]
Post subject: 

lmao you jerks lol jk :lol:

Author:  fasthid [ Tue Jun 17, 2008 8:21 pm ]
Post subject: 

ours sits real level, we have OME HD springs, struts, and OME long travel rear shocks

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/