LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Moab wheel weight vs. Pro Comp Series 51 wheel weight
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=33353		 Page 1 of 1
Author:  Inc [ Mon Jun 16, 2008 2:54 am ]
Post subject:  Moab wheel weight vs. Pro Comp Series 51 wheel weight
I want to get a set of the Moabs for when I wear out my tires so I can swap them out, paint them black and run 265/75/16 tires. The 15x8 wheels I run now are the Pro Comp Series 51 with 3.75 bs. Anyone kow much do they weigh? What do the Moabs weigh since they are a 16? I want the Moabs but would like to run a lighter wheel than the heavy steelie so if the Moabs aren't, why spend the $$. I might be able to get a good deal on some Moabs so I need to know if I would be wasting my $$ on them, because they may not be lighter than the series 51 Pro Comps. :?
Author:  tjkj2002 [ Mon Jun 16, 2008 8:05 am ]
Post subject: 
The MOAB's are just a few lbs lighter than the steel rims.The MOAB's are pretty thick as far as alloy rims go and are heavier then most think.
Author:  Inc [ Mon Jun 16, 2008 11:19 am ]
Post subject: 
So the weight saving wouldn't make a diff in power lost from the heavier tires and wheels?
Author:  tommudd [ Mon Jun 16, 2008 11:27 am ]
Post subject: 
I know that there is not much difference in the wight between Moabs and steelies but the weight of the tires affects performance a lot.
When I bought my Moabs they had 245 75 MTRs on and I could tell a huge difference between them and the 245 70s and stock wheels I had been running. When I took the MTRs off and installed the 255 70s it went back to almost what the stock tires felt like.
I would like to get another set of Moabs to mount some good trail tires on and also have a set with more of a street tread/ ATs for those weekends when I run a lot of highway miles.

Keep thinking about painting them black as well as I have two with some rock rash on them now.

Tom
Author:  KJ Taz [ Mon Jun 16, 2008 12:00 pm ]
Post subject: 
If you are trying to save weight, this is not going to do it for you.
Author:  jsc7002 [ Mon Jun 16, 2008 12:03 pm ]
Post subject: 
sounds like you might be needing some 4.10s :wink: me too :roll:
Author:  Inc [ Mon Jun 16, 2008 12:42 pm ]
Post subject: 
Yeah, I am trying to save weight, but I love the look of the Moabs especially black. Not sure what to do
Author:  KJ Taz [ Mon Jun 16, 2008 12:53 pm ]
Post subject: 
I like the look of the Moabs, but for wheeling steelies are definately a better way to go. I guess it just depends on what you want. I don't "need" the tires so don't let that affect your decision.
Author:  Sport [ Mon Jun 16, 2008 2:32 pm ]
Post subject: 
incubusmike wrote:
Yeah, I am trying to save weight, but I love the look of the Moabs especially black. Not sure what to do


I have been thinking the same thing about weight. if I could find a good set of these wrangler rims I would trade my steel wheels for them and fit my 31" tires on

Image
Author:  Xodius [ Mon Jun 16, 2008 3:07 pm ]
Post subject: 
Sport wrote:
incubusmike wrote:
Yeah, I am trying to save weight, but I love the look of the Moabs especially black. Not sure what to do


I have been thinking the same thing about weight. if I could find a good set of these wrangler rims I would trade my steel wheels for them and fit my 31" tires on

Image


That is a nice KJ you got there. I think that is also the first pic I have seen with the snorkel on in the US. Looking good!
Author:  Sport [ Mon Jun 16, 2008 4:33 pm ]
Post subject: 
oh sorry that is not my jeep, I borrowed the pic from a fellow aussie member.
Author:  Inc [ Mon Jun 16, 2008 4:44 pm ]
Post subject: 
Bummer, I really was hoping the alloy Moab would be lighter. Guess not. No point in selling the steelies for another wheel to do the exact same job in close to the same way. :? I don't need the wheels either so I guess its a no go. I appreciate the info though Taz. Also I rub when at full lock with the 31x10.5x15s so I know it would be worse for the 265/75/16s tires I would get. I guess that is money I can spend on the Aussie locker when it FINALLY comes out.
Author:  Jeepjeepster [ Mon Jun 16, 2008 4:45 pm ]
Post subject: 
The moabs on my Jeep weigh the same as my stock rims. ~25-30lbs per rim. I have the moabs from a 2006 wrangler though.

The 16x8 cragars I had weighed 50lbs per rim but they were the wide cragars. :shock:
Author:  tjkj2002 [ Mon Jun 16, 2008 5:50 pm ]
Post subject: 
Jeepjeepster wrote:
The moabs on my Jeep weigh the same as my stock rims. ~25-30lbs per rim. I have the moabs from a 2006 wrangler though.

The 16x8 cragars I had weighed 50lbs per rim but they were the wide cragars. :shock:
No way did the 16x8 Cragers weigh close to 50lbs each,I had a set of the "fake" beadlock steel rims(the "D" hole window ones),16x8,and with that extra metal ring on the outside bead they only sat at 36lbs each,the Soft 8 style rims are like 28lbs each in the 16x8 size,and the MOAB's are somewhere around 25lbs each.
Author:  Inc [ Mon Jun 16, 2008 6:12 pm ]
Post subject: 
After doing some serious searching, the Moabs weigh 24 and the Series 51 Pro Comps I have weigh in at 22 lbs. ??? So maybe the steelies are better for me anyway. I called a company and asked them the shipping weight of each and there it is.
Author:  Sport [ Tue Jun 17, 2008 8:40 am ]
Post subject: 
incubusmike wrote:
After doing some serious searching, the Moabs weigh 24 and the Series 51 Pro Comps I have weigh in at 22 lbs. ??? So maybe the steelies are better for me anyway. I called a company and asked them the shipping weight of each and there it is.


Dude, I wouldn't even sweat it. That setup you have looks great on your jeep. Sacrifice a mile or 2 per gallon in exchange for a whole lot of blank :shock: :shock: :shock: :twisted:
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/