LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

The Riddler 8.25 diff cover
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=33424		 Page 1 of 1
Author:  tjkj2002 [ Tue Jun 17, 2008 11:27 pm ]
Post subject:  The Riddler 8.25 diff cover
Well we finally got the diff cover fitted,perfect fit and no mods needed.It sure is pretty also.From being very high clearance you could even shave about 1/2" off the bottom of the diff itself and still not have any cover hanging out.I fitted it onto my diff since we wanted to make sure it had plenty of room with a ARB locker,clears just fine.To bad I had to take it off :cry: .It's made out of 90,000psi ductile iron,and no welds to leak.Fluid capicity will be the same if not a little more then stock.Sorry no drain plug,and will not be offered with one.
Image
Image
Image
Image
Image
Author:  KJ Taz [ Wed Jun 18, 2008 2:18 am ]
Post subject: 
Looks darn nice, can't wait for them to get into production!
Author:  Inc [ Wed Jun 18, 2008 2:30 am ]
Post subject: 
That is a thing of beauty. I'm still waiting on my cover from bugnout. Then I still have to send it back to Ruff Stuff because they want to replace it. This would have been the cover I was going to buy if I hadn't gotten such and amazing deal on the Ruff Stuff. It looks killer. 8) Are you going to be able to run these on your new axles Troy? I mean does Riddler make them for the axles you are swapping in?
Author:  modular [ Wed Jun 18, 2008 5:34 am ]
Post subject: 
Pretty sweet unit. Looks tough!
Author:  03kjsport [ Wed Jun 18, 2008 10:07 am ]
Post subject: 
when will these be for sale?
Author:  tjkj2002 [ Wed Jun 18, 2008 10:26 am ]
Post subject: 
incubusmike wrote:
That is a thing of beauty. I'm still waiting on my cover from bugnout. Then I still have to send it back to Ruff Stuff because they want to replace it. This would have been the cover I was going to buy if I hadn't gotten such and amazing deal on the Ruff Stuff. It looks killer. 8) Are you going to be able to run these on your new axles Troy? I mean does Riddler make them for the axles you are swapping in?
Riddler makes diff covers for many axles,next week I'll be ordering my Riddler D44 and D60 covers.
http://www.riddlermfg.com/products.html
Author:  Inc [ Wed Jun 18, 2008 10:29 am ]
Post subject: 
Nice 8) :twisted:
Author:  tjkj2002 [ Wed Jun 18, 2008 10:29 am ]
Post subject: 
03kjsport wrote:
when will these be for sale?
Very soon,you all will be some of the first to know when they are officially for sale.The one RL has is the first one made to test fit.I can't say actual price but should be similar to his other covers of the same size.
Author:  03kjsport [ Wed Jun 18, 2008 10:44 am ]
Post subject: 
thanks bro. ill buy it the day it comes out. i have a leaky diff guard on now that is driving me crazy.
Author:  kj924 [ Wed Jun 18, 2008 10:52 am ]
Post subject: 
I watched the promo video on these, and they look strong enough.

So, are these in production for the KJ now?
Author:  jsc7002 [ Wed Jun 18, 2008 5:54 pm ]
Post subject: 
kj924 wrote:
I watched the promo video on these, and they look strong enough.

So, are these in production for the KJ now?


not yet, but we will be the first to know he said
Author:  tjkj2002 [ Wed Jun 18, 2008 6:01 pm ]
Post subject: 
Quote:
I watched the promo video on these, and they look strong enough.
The Riddler covers did very good/same compared to other diff aemor on the market.
http://www.jpmagazine.com/techarticles/drivetrain/154_0708_bulletproof_test/index.html
Author:  Inc [ Wed Jun 18, 2008 6:08 pm ]
Post subject: 
I saw that test a while back when I was researching covers. Very cool test, that Great Lakes thing must be scary bada$$. That would be the last thing to go or give out on your jeep for sure. Kind of a bummer to blow a lot of cool diff covers though. But didn't cost them and it is good advertising for some of the manufacturers. I was also bummed not to see the Ruff Stuff one on there.
Author:  bugnout [ Wed Jun 18, 2008 6:19 pm ]
Post subject: 
Where do I sign up for the job of testing those covers :D :D
Author:  2006 KJ [ Wed Jun 18, 2008 7:58 pm ]
Post subject: 
wow.. that's a awesome diff cover. if it were out when i was doing mine i would've bought one hands down. that is a very very nice/shinny jack you have as well..
Author:  KJ2005 [ Mon Jun 23, 2008 1:24 am ]
Post subject: 
looks solid . doesn't seem to be many rear diff covers for the jeep liberty Chysler 8.25 just this riddler and/or ruff stuff
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/