rock rail question

kjsport05 · **Posted:** Sun Jun 22, 2008 5:32 pm

so the other night my passenger side got hung on a log while trying to pull another jeep out and it pulled the pos plastic side skirt off. i am about to order rock rails for it. my question is, if i order the rails for an 03 or 04, will they bolt in and keep me from having to buy a new $300 piece of plastic?

thanks
mike

Hood297 · **Posted:** Sun Jun 22, 2008 5:35 pm

Are you talking about the unpainted piece of plastic that runs parallel to the ground that covers a pinch weld? If so, then yes, that will have to be removed to install the rock rails.

jsc7002 · **Posted:** Sun Jun 22, 2008 5:42 pm

stock rock rails or some aftermarket ones?

kjsport05 · **Posted:** Sun Jun 22, 2008 6:14 pm

jsc7002 wrote:

stock rock rails or some aftermarket ones?

looking at the ones from all j's . . . i just want to take the one off the drivers side and slap the rok rails on there and call it a day . . . will this work? and yes, its the plastic that covers th pinch weld.

jsc7002 · **Posted:** Sun Jun 22, 2008 6:16 pm

ya you need to take off tha plastic peice to install the rock rails

LostEddie · **Posted:** Mon Jun 23, 2008 10:55 pm

Check out the pictures here:
http://www.lostjeeps.com/forum/phpBB3/vie ... ht=#277248

The plastic cover is not removed.

tommudd · **Posted:** Mon Jun 23, 2008 11:01 pm

all depends on the year if you remove it or not

LostEddie · **Posted:** Mon Jun 23, 2008 11:19 pm

RockLlizard instructions for the 05 is to leave them on, as I did with my 06. I am sure that you can take them off, but I don't know what it will look like.

http://www.rocklizardfabrications.com/i ... s_05kj.htm

Any one have a pic of the 05 with the plastic off (with or without boulder bars)?

rock rail question

Who is online