What to do? I haven't looked at a lot of the SAS threads but, here's the deal. I won a LOT of stuff from the Wind River 4x4 show. $100 certificate for Performance Steering Components, 15% off of ANY thing that American Expedition Vehicles sells (don't they sell Nth degree stuff that some have used for SFA swaps?), AND a Smittybuilt XRC8. I only have a Rusty's lift so I would need to upgrade the3 lift but, I honestly don't want to rebuild my IFS a third time. I'd rather just throw a high pinion D30 or a D44 under it, add about 3 more inches of lift, 33"s, lockers, and call it done. So, Can anyone direct me to an SAS build that uses AEV (Nth degreee, if they sell them) parts? I think I could probably sell the PSC certificate, as I don't think I'll need it. Will I? That would probably just about pay for the aluminum to build a bumper to hold this 90+ pound winch. Thanks for any and all advice.
Oh! Those were just raffle prizes that I spent a total of $7 on.
I also won 1st place in the '95 to present "stock" class at the show today, again! The Saturday day-run trail was quite a bit more challenging this year. I got stuck in a muddy rut when everyone in front of me stopped and had to be winched over two big rocks that were side by side on a muddy hill. But, overall I didn't do too badly at all. Thanks again for the sliders, Marty. I used them a LOT, yesterday! 