LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

... and let the Fun BEGIN!!!
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=33681		 Page 1 of 1
Author:  KJKen [ Fri Jun 27, 2008 1:21 pm ]
Post subject:  ... and let the Fun BEGIN!!!
I am off work now and am getting started on the lift.

Tale of the Tape
Front Wheels:
Ground to Flair: 32"
Center of Hub to Flair: 18 1/2"
Rear Wheels:
Ground to Flair: 32 1/2"
Centerof Hub to Flair: 19"

Pictures to follow, wish me luck.
Author:  tommudd [ Fri Jun 27, 2008 1:38 pm ]
Post subject: 
Good Luck, give you 3 hours to get finished pictures on here! :lol: :lol:
Author:  Xodius [ Fri Jun 27, 2008 1:45 pm ]
Post subject: 
WOOOHOOO, cant wait for the pics.
Author:  KJKen [ Fri Jun 27, 2008 2:02 pm ]
Post subject: 
HAHA!! 3 hours my struts are not getting compressed until tomorrow when my tires get mounted. Should have the rear finished shortly and start the front after that.
Author:  Cobalt-60 [ Fri Jun 27, 2008 2:15 pm ]
Post subject: 
tommudd wrote:
Good Luck, give you 3 hours to get finished pictures on here! :lol: :lol:



Ppppppppffffffftttttttttttttt!!!!!!!!!!! ROTFLMAO!!!!!! Yeah,..... RIGHT..... ;'-D
Author:  tommudd [ Fri Jun 27, 2008 2:26 pm ]
Post subject: 
what 3 hours is plenty of time :wink:
Author:  KJKen [ Fri Jun 27, 2008 3:10 pm ]
Post subject: 
Alrighty, the rear is finished and the axel is loaded new numbers fro the center of the hub are a whopping 21"
Author:  JL Rockies [ Fri Jun 27, 2008 4:28 pm ]
Post subject: 
I helped my friend install my FL II. In the time it took me to remove the air box and battery tray, he had the rear done and was waiting on me to get out of his way to finish the front.
The whole install was 45 mins....it was crazy.
Author:  KJKen [ Fri Jun 27, 2008 5:50 pm ]
Post subject: 
Just about finished with the front side of the lift much easier then I thought. only problem now are the bumpstops, I've tried and tried with no results. any suggestions?
Author:  KJKen [ Fri Jun 27, 2008 6:38 pm ]
Post subject: 
Well that is it for tonight. Everything is done, need to do brakes tomorrow and rebuild front.
Author:  KJKen [ Sun Jun 29, 2008 1:38 pm ]
Post subject: 
Now for the update!!! the front is full assembled and on the ground. It was a little tricky getting the forks reconnected to the lower arms no big deal though. Just ran into a little trouble on the rear drums. Had to run out and get new hardware. should be done soon and back on the road. Will update with pictures soon.

thanks to everyone for your input, and help.
Author:  rangerd77 [ Sun Jun 29, 2008 8:55 pm ]
Post subject: 
update anytime soon would be nice and pics also. but if you work like i do, you probably gonna have to go out and get more alcohol. :lol:
Author:  KJKen [ Mon Jun 30, 2008 9:06 am ]
Post subject: 
I have pictures on my camera just need to figure out how to post them
Author:  jsc7002 [ Mon Jun 30, 2008 10:00 am ]
Post subject: 
KJKen wrote:
I have pictures on my camera just need to figure out how to post them


try photobucket, it free and super easy to use
Author:  KJKen [ Mon Jun 30, 2008 1:26 pm ]
Post subject:  Pictures Finally, atleast the before and during
Image
Before from the side
Image
From the Front
Image
and the rear
Image
Rear on Jacks
Image
Rear Wheel Well Before
Image
Daystar Spacer installed
Image
On to the Front
Image
Tear Down Begins
Image
What's missing in this Pic?
Image
and there goes the pinchies
Image
after a little paint... plan on rhino-lining the wells
Image
and the strut assembly fully asembled

More pics to come after I get some pics today of the finished product
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/