| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| What size bolt is this? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=34537 |
Page 1 of 1 |
| Author: | ObiHann [ Tue Jul 29, 2008 10:29 am ] |
| Post subject: | What size bolt is this? |
The bolts that hold the back seat in, the smaller ones... what size is that? They hold the brackets down that are a support for the back seats, there is usually 1 bolt on each side, than 2 close to the middle. I lost one when I was taking my carpets out... Maybe I will just replace them all with stainless steel LOL |
|
| Author: | daspes [ Tue Jul 29, 2008 11:26 am ] |
| Post subject: | |
Just had mine off this weekend, along with everything else in the interior. It is either a 10mm or a 12mm. Just can't remember which one... |
|
| Author: | 03CDKJ [ Tue Jul 29, 2008 11:50 am ] |
| Post subject: | Re: What size bolt is this? |
ObiHann wrote: The bolts that hold the back seat in, the smaller ones... what size is that? They hold the brackets down that are a support for the back seats, there is usually 1 bolt on each side, than 2 close to the middle. I lost one when I was taking my carpets out... Maybe I will just replace them all with stainless steel LOL
I believe they are 10 mm... If you have the others....shouldn't you be able to tell 
|
|
| Author: | ObiHann [ Tue Jul 29, 2008 12:07 pm ] |
| Post subject: | |
I have the other... but I was kind of hoping I could get it off the top of someones head, that way I don't have to walk into a store and say "do you have one of these?" and feel like a idiot 
|
|
| Author: | 03CDKJ [ Tue Jul 29, 2008 12:12 pm ] |
| Post subject: | |
ObiHann wrote: I have the other... but I was kind of hoping I could get it off the top of someones head, that way I don't have to walk into a store and say "do you have one of these?" and feel like a idiot
yes, I know that feeling.... 
|
|
| Author: | tommudd [ Tue Jul 29, 2008 12:36 pm ] |
| Post subject: | |
cdiekhans wrote: ObiHann wrote: I have the other... but I was kind of hoping I could get it off the top of someones head, that way I don't have to walk into a store and say "do you have one of these?" and feel like a idiot yes, I know that feeling.... 
|
|
| Author: | tjkj2002 [ Tue Jul 29, 2008 12:40 pm ] |
| Post subject: | |
ObiHann wrote: I have the other... but I was kind of hoping I could get it off the top of someones head, that way I don't have to walk into a store and say "do you have one of these?" and feel like a idiot You know that most places that sell fastners will have bolt size charts so you do not need to ask that question,just bring the bolt in and find the corisponding nut that fits it to get the bolt size.
|
|
| Author: | ObiHann [ Tue Jul 29, 2008 12:59 pm ] |
| Post subject: | |
Cool, thanks for the info! I shall have to go a hardware shop on the way home
|
|
| Author: | tommudd [ Tue Jul 29, 2008 1:06 pm ] |
| Post subject: | |
ObiHann wrote: Cool, thanks for the info! I shall have to go a hardware shop on the way home
they also have these neat little guages that you stick a bolt in to find the size for sell as well, have a couple hanging in the garage so I know as soon as I pull a bolt out what size it is, also have for drill bits etc. great little tools for reference |
|
| Author: | ObiHann [ Tue Jul 29, 2008 1:11 pm ] |
| Post subject: | |
tommudd wrote: ObiHann wrote: Cool, thanks for the info! I shall have to go a hardware shop on the way home they also have these neat little guages that you stick a bolt in to find the size for sell as well, have a couple hanging in the garage so I know as soon as I pull a bolt out what size it is, also have for drill bits etc. great little tools for reference Well, maybe Ill get that too LOL |
|
| Author: | Dje Ryu [ Wed Jul 30, 2008 1:52 am ] |
| Post subject: | |
You guys wouldn't believe the tools I have available to measure thread pitches/diameters/tapers, etc. Never taken the seats out so I don't know for certain but if the head is 12mm, then the thread pattern is probably something like M10x1.5 or M8x1.25. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|