| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Winch mount for hitch http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=34811 |
Page 1 of 2 |
| Author: | rangerd77 [ Thu Aug 07, 2008 1:14 am ] |
| Post subject: | Winch mount for hitch |
does anyone have one of these on here? and if you do where did you get it from other than the obvious WARN, and how well does it work for you. or if you know anyone that has one or any other vehicle, how well does ir work for them? ive been thinking about getting one, hence the one of the reasons that i put a front hitch on. but im not paying $203 for a darn winch plate. |
|
| Author: | jsc7002 [ Thu Aug 07, 2008 1:36 am ] |
| Post subject: | |
Hidden for $125 http://cgi.ebay.com/ebaymotors/Hidden-H ... 18Q2el1247 im looking at getting one too so if you find a good deal let me know! |
|
| Author: | rangerd77 [ Thu Aug 07, 2008 1:47 am ] |
| Post subject: | |
good find bro. and yea, i bought one. thanks man |
|
| Author: | jsc7002 [ Thu Aug 07, 2008 1:49 am ] |
| Post subject: | |
haha no problem! what winch do you have? or are you getting? |
|
| Author: | jason thompson [ Thu Aug 07, 2008 7:19 am ] |
| Post subject: | |
Just think about this before you get one if you are riding you can not have it in place when you get stuck will you be able to get it in? I like this picture because it kind of proves my point if we had the winch in a front hitch we could not do this
|
|
| Author: | ohv_kj [ Thu Aug 07, 2008 10:36 am ] |
| Post subject: | |
i had one and sold it to someone on here...what i did was keep it in the back until i needed it...i had cables running to the front and back...that pic could only be a rear pull anyway |
|
| Author: | rangerd77 [ Thu Aug 07, 2008 11:50 am ] |
| Post subject: | |
jsc7002 wrote: haha no problem! what winch do you have? or are you getting?
i have the Superwinch LP8500. |
|
| Author: | jsc7002 [ Thu Aug 07, 2008 12:09 pm ] |
| Post subject: | |
how much was it? and how good does it work? |
|
| Author: | RespectMyLibertay [ Thu Aug 07, 2008 12:36 pm ] |
| Post subject: | |
Run the electrical to the rear hitch as well. It makes a lot of sense and then you don't have the problems jason thompson talked about. He's assuming you plan to mount the hitch up front, which is a good assumption because I'm sure you were, but think about the versatility of being able to winch from both ends! |
|
| Author: | jason thompson [ Thu Aug 07, 2008 5:56 pm ] |
| Post subject: | |
RespectMyLibertay wrote: Run the electrical to the rear hitch as well.
It makes a lot of sense and then you don't have the problems jason thompson talked about. He's assuming you plan to mount the hitch up front, which is a good assumption because I'm sure you were, but think about the versatility of being able to winch from both ends! it does not matter where you put it having something hanging out like that ,front or rear, will hinder off road progress if not break it off and there is no reason I could not have used a winch to pull my self from the front if I had on on an ARB type system there is a roller on the bottom, both sides, and the top ,right? besides on a hill that steep gravity is all the help you need my point is this #1 winches are HEAVY #2 75% of the time when I see winches being pulled the rig in question is stuck in the mud if you are stuck in the mud then there is no hope of "gingerly" getting out and grabbing the winch cable to avoid getting covered in mud you have to go get the winch out ,get it in the hitch, clean out the plug, hook it up then get the winch cable Most of the time wheeling with a comparable rig to yours and using good common sense will avoid the need for a winch I dont have a winch ,have been wheeling with as many as 10 rigs to 1 winch wheeled on level 3-4 trails ,on a 1-5 scale, and never pulled a winch cable sure we used straps ,and a few little "group pushes" but no winches |
|
| Author: | callaway [ Thu Aug 07, 2008 6:24 pm ] |
| Post subject: | |
heres a picture from when I had the hitch up front with the winch...
If this setup had been on the pic jason posted earlier the winch would have been buried . Having a winch mounted to on a front hitch will kill your approach angle. I got rid of my front hitch and put on a backbone for that reason alone. |
|
| Author: | nosnorb_808 [ Thu Aug 07, 2008 7:00 pm ] |
| Post subject: | |
I like the idea because of the versatility like the others talked about. In the situation in the pic you would have been able to rear winch out of that. Even with the backbone on looks like it would be buried. Also you dont need to ride with it on. I would personally keep it in the rear compartment until I needed it. I was thinking about getting a ARB bumper but I think this might be a better route. |
|
| Author: | rangerd77 [ Thu Aug 07, 2008 8:43 pm ] |
| Post subject: | |
RespectMyLibertay wrote: Run the electrical to the rear hitch as well.
It makes a lot of sense and then you don't have the problems jason thompson talked about. He's assuming you plan to mount the hitch up front, which is a good assumption because I'm sure you were, but think about the versatility of being able to winch from both ends! well thats what you get for assuming. really? dont do that, its not cool. hence the reason that i got the winch mount for the HITCH, so i could use it front and back. |
|
| Author: | jason thompson [ Thu Aug 07, 2008 8:46 pm ] |
| Post subject: | |
nosnorb_808 wrote: I like the idea because of the versatility like the others talked about. In the situation in the pic you would have been able to rear winch out of that. Even with the backbone on looks like it would be buried. Also you dont need to ride with it on. I would personally keep it in the rear compartment until I needed it. I was thinking about getting a ARB bumper but I think this might be a better route.
versatility ,yes no you would not have buried a "Back Bone" on that obstacle ,aka the "snow cones", because it mounts on top of the bumper a rear pull would have been a hard pull because the trail goes up and over what looks like to HUGE balls buried in the mud gravity would have killed you and due to the rig wanting to slide side to side It is just that rare situation where the only option was going forward my wife was driving and it looks bad but as long as you do not turn it was a non issue now if you turn ,you roll |
|
| Author: | rangerd77 [ Thu Aug 07, 2008 8:48 pm ] |
| Post subject: | |
nosnorb808--- it is a beter idea. and i dont have all that weight with the bumper and the winch. plus i can use it in the fornt and the back. what are people not getting about that? |
|
| Author: | tjkj2002 [ Thu Aug 07, 2008 8:56 pm ] |
| Post subject: | |
rangerd77 wrote: nosnorb808--- it is a beter idea. and i dont have all that weight with the bumper and the winch. plus i can use it in the fornt and the back. what are people not getting about that? Because you are severly limited on the pulling capicity because the hitches,front or rear,is not designed for the stress that a winch creates.As long as you never do any other then a straight pull you'd be pretty okay but those not so straight pulls can lead to diaster with a hitch mounted winch.
Just remember a winch mounted in a front hotch on a KJ you should not pull anymore then 5000lbs,that's barely just over the weight of the KJ,not very safe and the same goes for the rear hitch also. Novel idea but will be a major disapointment when you actually need to use that winch. |
|
| Author: | nosnorb_808 [ Thu Aug 07, 2008 9:00 pm ] |
| Post subject: | |
Rangerd77 I think they think for some reason you run with it on. Another thing is someone mention they didnt wanna have to get out in some mud & get dirty, hence making the winch mount hitch worthless. |
|
| Author: | nosnorb_808 [ Thu Aug 07, 2008 9:05 pm ] |
| Post subject: | |
A friend of mine had a hitch winch mount setup on his Toyota pickup back when I lived in hawaii. It worked extremely well pulling himself out of some sticky muddy situations aswell as others with no problems, But then again it was a Toyota pickup. Not saying its better but just a different vehicle. |
|
| Author: | ohv_kj [ Thu Aug 07, 2008 9:45 pm ] |
| Post subject: | |
don't keep it there...mine stayed in the back of the kj, i i only brought it out when i need it...there is nothing there to hit if it is not there to begain with... |
|
| Author: | jsc7002 [ Thu Aug 07, 2008 9:51 pm ] |
| Post subject: | |
tjkj2002 wrote: rangerd77 wrote: nosnorb808--- it is a beter idea. and i dont have all that weight with the bumper and the winch. plus i can use it in the fornt and the back. what are people not getting about that? Because you are severly limited on the pulling capicity because the hitches,front or rear,is not designed for the stress that a winch creates.As long as you never do any other then a straight pull you'd be pretty okay but those not so straight pulls can lead to diaster with a hitch mounted winch.Just remember a winch mounted in a front hotch on a KJ you should not pull anymore then 5000lbs,that's barely just over the weight of the KJ,not very safe and the same goes for the rear hitch also. Novel idea but will be a major disapointment when you actually need to use that winch. I agree with you but it also depends on how the hitch was set up, like tight now my bumper has 6 Grade 8 bolts and Im adding another 3 or 4 that would add way more strength to my set-up |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|