LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Never good to hear something snap
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=35393
Page 1 of 1

Author:  LRwrnglr [ Mon Aug 25, 2008 12:25 pm ]
Post subject:  Never good to hear something snap

So me, my brother, and two buddies are installing my Rusty's 2.5" suspension lift the other night. We got the struts back in and put the wishbone that the strut sits on, and bolts to the A-arm, bolted in and torquing it down. Im pretty sure the torque wrench was set wrong, and SNAP, we look down and the collar that goes around the bottom of them strut is snapped in two. Does anybody have a spare I can buy cheaper than the stealership? It is a passenger side, thanks

LR

Author:  Maximum Carnage [ Mon Aug 25, 2008 2:24 pm ]
Post subject: 

I’m currently using mine but try a local junk yard before heading to the Stealership.

Author:  LRwrnglr [ Mon Aug 25, 2008 2:38 pm ]
Post subject: 

Well my roomates dad owns a salvage yard but he didn't have anything and everything that he found through his connections would only sell it with the strut assembly which I don't need. The closest stealership was $450.......yeah don't think so! So I ordered one through a stealership bout an hour away for $150.....I was just throwing a feeler out to see if anybody had a spare laying around in the garage...thanks

LR

Author:  JJsTJ [ Mon Aug 25, 2008 3:22 pm ]
Post subject: 

How soon do you need it? Pretty sure mine from my sfa swap are lying around somewhere....just gotta figure out which corner I tossed them into. :?

Author:  LRwrnglr [ Mon Aug 25, 2008 3:37 pm ]
Post subject: 

As soon as I can get them.....if it will be cheaper than $150

Author:  bugnout [ Mon Aug 25, 2008 4:32 pm ]
Post subject: 

If this is the Clevis strut fork, Its only $48.00 from moparpartsamerica.com

http://www.trademotion.com/partlocator/index.cfm?action=getJointLocator&siteid=214583&chapter=&Sectionids=19,2512&groupid=20135&subgroupid=62160&componentid=0&make=17&model=Liberty&year=2005&graphicID=T043050&callout=6&catalogid=1&displayCatalogid=0

Author:  LRwrnglr [ Mon Aug 25, 2008 4:53 pm ]
Post subject: 

that $48 was for #6 on that diagram right? don't want to order the wrong part haha

Author:  jsc7002 [ Mon Aug 25, 2008 5:13 pm ]
Post subject: 

ya that looks like it, and a lot cheaper than the stealership

Author:  LRwrnglr [ Mon Aug 25, 2008 5:30 pm ]
Post subject: 

Yes sir it is!

Author:  dac44444 [ Fri Mar 26, 2010 8:37 pm ]
Post subject:  Re: Never good to hear something snap

And one for KK is only $36. Someone posted they are .25" longer for net .5" lift. Am I correct or not anybody know for sure? Are all the bolts the same? Any other pertinant information appreciated?

Author:  Neatus [ Mon Mar 29, 2010 11:09 am ]
Post subject:  Re: Never good to hear something snap

I will give you one of mine for the price of shipping. PM me if you need it

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/