| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| T-Max Winch in an ARB Winch Bumper http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=35443 |
Page 1 of 1 |
| Author: | KJTUGA [ Wed Aug 27, 2008 9:12 am ] |
| Post subject: | T-Max Winch in an ARB Winch Bumper |
Hello, Just a quickie, do you guys know what I need to do to get the T-Max winch to fit into a ARB Bumper, the holes are all wrong adn I am lost. I was thinking of getting a steel plate to cover the original holes and punch new ones through the plate but maybe there is something easier. Thanks alot. |
|
| Author: | KJ 119 [ Wed Aug 27, 2008 10:26 pm ] |
| Post subject: | |
A piece of plate ought to do.Make sure you prime and paint the plate to avoid any rust issues. |
|
| Author: | LIV42DY [ Wed Aug 27, 2008 11:29 pm ] |
| Post subject: | |
holes are drilled for warn if I recall from my buddys Kj. you will need to modify for the TJMax |
|
| Author: | JL Rockies [ Thu Aug 28, 2008 11:02 am ] |
| Post subject: | |
As long as the winch is a two piece design (control box seperate from the drum and motor body) it should be fine. I have a Mile Marker mounted to my ARB and I didn't have a problem. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|