LOST JEEPS :: View topic - Riddler 8.25 diff covers are now available.

Could I just have the dealer put the riddler back on instead of stock when I change my diff fluid, it is a simple swap. I have free maintenance. But if extra work, like grinding is needed, I'm sure they won't do it or charge me for it. What else do you need for install, new seals?

loosvelt wrote:

there shouldnt be any extra work, they would just need to put some RTV on it and bolt it back on just like the stock cover

Very nice, I’ll have Josh from Crawlertech 4x4 install mine when he does my lockers. Will RL keep a few diff covers on hand? I’ll be coming up for the lift install and I can grab one then. I want to paint mine before the install, especially the “R” and the “skull”! :twisted:

When I replace my diff fluid I may get 1 to, Are they going to come up with something for the d30 as well?

dieselenthusiast wrote:

You may not want to have Josh install the Riddler cover,better yet don't even show it/mention it.He owns Crane High Clearance also and is a direct compition with Tim at Riddler(Tim was at one time one of the original Crane owners).

$130 shipped from Rock Lizard Fab or call Tim a Riddler((303)651-7757) to order,90,000psi ductile iron contruction,RTV supplied,recessed bolt holes.

tjkj2002 wrote:

$130 shipped from Rock Lizard Fab or call Tim a Riddler((303)651-7757) to order,90,000psi ductile iron contruction,RTV supplied,recessed bolt holes.

It looks good, but is there an option for a drain plug?

Sorry there is not,you can take it up with Tim at Riddler about it though.No need for one though and having one makes it a very big target for getting smashed against a rock and then your SOL when your diff cover will not hold fluid due to a broken drain plug.

Well I suppose you have a point if you were to hit a rock freakish (just right) but as I was looking at the RuffStuff diff cover, it seems the logical choice would be to recess the plug - or maybe add a collar.

Thanks (for the fyi) just the same.

Just my 2 pennies here but I really do not see the reason for a drain plug.
For me one it may get hit and broken,
it may get stripped out,
PLUS I really want to see what all is going on in there each time I change it out.
I hate it that I can not get into the front diff easier!
Not that hard to take off, and not as messy as changing the oil so no real benefit....well as I see it :wink:

t cool.
Tom

Author:	tjkj2002 [ Sun Aug 31, 2008 8:06 pm ]
Post subject:	Riddler 8.25 diff covers are now available.
$130 shipped from Rock Lizard Fab or call Tim a Riddler((303)651-7757) to order,90,000psi ductile iron contruction,RTV supplied,recessed bolt holes.

Author:	jeepkj02 [ Sun Aug 31, 2008 9:41 pm ]
Post subject:
:drool: Next time I change my diff fluid that is going in.

Author:	InCommando [ Sun Aug 31, 2008 10:14 pm ]
Post subject:
Looks good!

Author:	loosvelt [ Mon Sep 01, 2008 10:40 am ]
Post subject:
Could I just have the dealer put the riddler back on instead of stock when I change my diff fluid, it is a simple swap. I have free maintenance. But if extra work, like grinding is needed, I'm sure they won't do it or charge me for it. What else do you need for install, new seals?

Author:	jsc7002 [ Mon Sep 01, 2008 11:02 am ]
Post subject:
loosvelt wrote: Could I just have the dealer put the riddler back on instead of stock when I change my diff fluid, it is a simple swap. I have free maintenance. But if extra work, like grinding is needed, I'm sure they won't do it or charge me for it. What else do you need for install, new seals? there shouldnt be any extra work, they would just need to put some RTV on it and bolt it back on just like the stock cover

LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/

Riddler 8.25 diff covers are now available. http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=35541	Page 1 of 2

Author:	jeepkj02 [ Mon Sep 01, 2008 11:16 am ]
Post subject:
jsc7002 wrote: loosvelt wrote: Could I just have the dealer put the riddler back on instead of stock when I change my diff fluid, it is a simple swap. I have free maintenance. But if extra work, like grinding is needed, I'm sure they won't do it or charge me for it. What else do you need for install, new seals? there shouldnt be any extra work, they would just need to put some RTV on it and bolt it back on just like the stock cover Yeah...it would be even easier, because you don't have to scrape the old RTV on the stock cover.

Author:	dieselenthusiast [ Mon Sep 01, 2008 1:33 pm ]
Post subject:
Very nice, I’ll have Josh from Crawlertech 4x4 install mine when he does my lockers. Will RL keep a few diff covers on hand? I’ll be coming up for the lift install and I can grab one then. I want to paint mine before the install, especially the “R” and the “skull”!

Author:	jeepmedic46 [ Mon Sep 01, 2008 3:37 pm ]
Post subject:
When I replace my diff fluid I may get 1 to, Are they going to come up with something for the d30 as well?

Author:	jsc7002 [ Mon Sep 01, 2008 4:46 pm ]
Post subject:
there is nothing for the D30a and I would be extremely surprised if anything ever came out for it, and you dont need it if you have your front engine skid on

Author:	tjkj2002 [ Mon Sep 01, 2008 7:24 pm ]
Post subject:
dieselenthusiast wrote: Very nice, I’ll have Josh from Crawlertech 4x4 install mine when he does my lockers. Will RL keep a few diff covers on hand? I’ll be coming up for the lift install and I can grab one then. I want to paint mine before the install, especially the “R” and the “skull”! You may not want to have Josh install the Riddler cover,better yet don't even show it/mention it.He owns Crane High Clearance also and is a direct compition with Tim at Riddler(Tim was at one time one of the original Crane owners).

Author:	tjkj2002 [ Mon Sep 01, 2008 7:25 pm ]
Post subject:
icefisher45 wrote: When I replace my diff fluid I may get 1 to, Are they going to come up with something for the d30 as well? He has D30 covers but it will not fit on the D30A due to one of the D30A mounting brackets prevents it,plus no need for a HD cover on the D30A since the front skid is for that.

Author:	03kjsport [ Mon Sep 01, 2008 9:30 pm ]
Post subject:
ive had one for a few months now. it fit right on perfect. great product. plus did you catch the promo video on utube. its solid. A+

Author:	tommudd [ Mon Sep 01, 2008 10:14 pm ]
Post subject:
I didn't paint mine red , maybe I should after seeing yours 03kjsport!!!

Author:	CrossBones [ Mon Sep 01, 2008 10:30 pm ]
Post subject:	Re: Riddler 8.25 diff covers are now available.
tjkj2002 wrote: $130 shipped from Rock Lizard Fab or call Tim a Riddler((303)651-7757) to order,90,000psi ductile iron contruction,RTV supplied,recessed bolt holes. It looks good, but is there an option for a drain plug?

Page 1 of 2	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/

Author:	tjkj2002 [ Mon Sep 01, 2008 11:04 pm ]
Post subject:	Re: Riddler 8.25 diff covers are now available.
CrossBones wrote: tjkj2002 wrote: $130 shipped from Rock Lizard Fab or call Tim a Riddler((303)651-7757) to order,90,000psi ductile iron contruction,RTV supplied,recessed bolt holes. It looks good, but is there an option for a drain plug? Sorry there is not,you can take it up with Tim at Riddler about it though.No need for one though and having one makes it a very big target for getting smashed against a rock and then your SOL when your diff cover will not hold fluid due to a broken drain plug.

Author:	CrossBones [ Mon Sep 01, 2008 11:49 pm ]
Post subject:
Well I suppose you have a point if you were to hit a rock freakish (just right) but as I was looking at the RuffStuff diff cover, it seems the logical choice would be to recess the plug - or maybe add a collar. Thanks (for the fyi) just the same.

Author:	tommudd [ Mon Sep 01, 2008 11:54 pm ]
Post subject:
CrossBones wrote: Well I suppose you have a point if you were to hit a rock freakish (just right) but as I was looking at the RuffStuff diff cover, it seems the logical choice would be to recess the plug - or maybe add a collar. Thanks (for the fyi) just the same. Just my 2 pennies here but I really do not see the reason for a drain plug. For me one it may get hit and broken, it may get stripped out, PLUS I really want to see what all is going on in there each time I change it out. I hate it that I can not get into the front diff easier! Not that hard to take off, and not as messy as changing the oil so no real benefit....well as I see it Tom

Author:	dieselenthusiast [ Tue Sep 02, 2008 12:19 am ]
Post subject:
tommudd wrote: Just my 2 pennies here but I really do not see the reason for a drain plug. For me one it may get hit and broken, it may get stripped out, PLUS I really want to see what all is going on in there each time I change it out. I hate it that I can not get into the front diff easier! Not that hard to take off, and not as messy as changing the oil so no real benefit....well as I see it t cool. Tom When you run a good oil like Amsoil, and you have a magnetic dip stick and a magnetic drain plug, then there is no reason to pull the pan when you can pull the recessed plug. ARB does it. And everything that ARB does is just cool. And it just makes sense to me, but what do I know, I’m just a school boy.