What he said..
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Liberty Exhaust dimensions http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=35722 |
Page 1 of 1 |
| Author: | Shortbus04 [ Sun Sep 07, 2008 5:28 pm ] |
| Post subject: | Liberty Exhaust dimensions |
Short of me crawling under my gf's Liberty, does anyone know the dimensions of the Liberty muffler? I believe the inlet to the muffler is 2.5" ID, but i'm not sure if the outlet is the same. Is the outlet smaller (2.25" ID)? Any help would be greatly appreciated. -E- |
|
| Author: | tommudd [ Sun Sep 07, 2008 5:32 pm ] |
| Post subject: | |
both 2.5 inch, some neck down to 2.35 right before the muffler but you can cut that off to go 2.5 all the way |
|
| Author: | Jeepjeepster [ Sun Sep 07, 2008 7:40 pm ] |
| Post subject: | |
What he said..
|
|
| Author: | rangerd77 [ Mon Sep 08, 2008 7:18 am ] |
| Post subject: | |
Jeepster---how in the world do you keep you under so damm clean? and what control arms are they on the rear? what is that i see a new axel also? sorry for the thread hi-jack |
|
| Author: | tommudd [ Mon Sep 08, 2008 9:18 am ] |
| Post subject: | |
rangerd77 wrote: Jeepster---how in the world do you keep you under so damm clean? and what control arms are they on the rear? what is that i see a new axel also?
sorry for the thread hi-jack he got bored one weekend and pulled the whole rear axle out and painted everything. You know how boring it gets in Kentucky some times 
|
|
| Author: | Maximum Carnage [ Mon Sep 08, 2008 11:41 am ] |
| Post subject: | |
I’m assuming it’s 2.5” ID am I correct or is it OD? ? |
|
| Author: | rangerd77 [ Mon Sep 08, 2008 2:12 pm ] |
| Post subject: | |
it is 2.5 OD bro. |
|
| Author: | 06 KJ Sport [ Mon Sep 08, 2008 4:06 pm ] |
| Post subject: | |
Jeepjeepster wrote: That looks like mine, only it doesn't have a big A^* dent in it 
|
|
| Author: | CrossBones [ Mon Sep 08, 2008 4:53 pm ] |
| Post subject: | |
If, or when I replace the muffler on my KJ, I am going with the FlowMaster 44 Diamond Plate version. All the specs you need are on that linky. And fwiw, that muffler is only $89.95 @ Summit Racing web site. |
|
| Author: | rangerd77 [ Mon Sep 08, 2008 7:33 pm ] |
| Post subject: | |
yeah that FM 44 is what ive had on all my TJ's in the past but i think it was called something else though. very good fit and sound i think. also very very strong. i remember i tested it out before i out it on my TJ, yeah, i ran over it a few times just to make sure that it would hold up to anything or rocks or trees, you know things of that nature. |
|
| Author: | CrossBones [ Mon Sep 08, 2008 7:48 pm ] |
| Post subject: | |
Cool. Yeah, incubusmike easily convinced me that was the muffler to go with. |
|
| Author: | Jeepjeepster [ Mon Sep 08, 2008 8:41 pm ] |
| Post subject: | |
tommudd wrote: rangerd77 wrote: Jeepster---how in the world do you keep you under so damm clean? and what control arms are they on the rear? what is that i see a new axel also? sorry for the thread hi-jack he got bored one weekend and pulled the whole rear axle out and painted everything. You know how boring it gets in Kentucky some times haha, yup, got bored one weekend so out it came! Strapped it up to a basket ball goal and painted away! That was a year ago and there still isnt a drop of rust on it. 
I would love to do the front suspension too but I dont want to get an alignment again. Could paint the lower arms on the Jeep but dont want any over spray. 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|