| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| QuickLIFTby rancho. http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=36006 |
Page 1 of 1 |
| Author: | surfrico [ Wed Sep 17, 2008 3:00 pm ] |
| Post subject: | QuickLIFTby rancho. |
I see Rancho has a new product called," quickLIFT". Has anyone tried them yet on there KJ ? Ron |
|
| Author: | tommudd [ Wed Sep 17, 2008 3:05 pm ] |
| Post subject: | |
been out a year or more, and with the price I would rather go with OME springs etc, basically just the regular stock spring rate from what I have heard / seen |
|
| Author: | Guest [ Wed Sep 17, 2008 3:27 pm ] |
| Post subject: | |
it's a shock that only moves the mounting point upward. There's no spring included. Then you still have to sort out the rear. Go OME |
|
| Author: | myjeepwalks [ Wed Sep 17, 2008 8:50 pm ] |
| Post subject: | |
ThunderbirdJunkie wrote: Go OME
Tha is all that needs to be said period. |
|
| Author: | ShafferNY [ Tue Sep 23, 2008 5:47 pm ] |
| Post subject: | |
I was under the impression the QuickLift came completely put together...strut, coil spring, etc. Much like the Monroe QuickStrut. |
|
| Author: | Guest [ Tue Sep 23, 2008 11:20 pm ] |
| Post subject: | |
Shaffer, I was under that impression too, but a call to Rancho's guys quickly put that to rest. |
|
| Author: | ShafferNY [ Wed Sep 24, 2008 4:11 pm ] |
| Post subject: | |
Wow. That's a bit misleading. I was actually thinging about going that route at one point because the struts on my KJ are shot. At this point the plan is to save for the OME springs and Rancho's for all four corners. |
|
| Author: | tommudd [ Wed Sep 24, 2008 4:17 pm ] |
| Post subject: | |
ShafferNY wrote: Wow. That's a bit misleading. I was actually thinging about going that route at one point because the struts on my KJ are shot.
At this point the plan is to save for the OME springs and Rancho's for all four corners. great plan!!!!!!! |
|
| Author: | jsc7002 [ Wed Sep 24, 2008 4:20 pm ] |
| Post subject: | |
X2 you cant beat OME! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|