LOST JEEPS :: View topic - D30a 4.10 Gears

How can you tell if you have the correct gears or not?

I called Reider Racing and said I need 4.10 gears for the front of the Jeep Liberty and I got them today but the box says 30D/410T Dana 30-410 Ring and Pinion Jeep TJ

who all makes 4.10 gears for the front?

You got the wrong ones,you needed to tell them you needed gears for the D30A or FIA186mm.Dana/Spicer makes the correct gears along with Precision gears.You need to be very specific about the D30A gears and what you ask for.

tjkj2002 wrote:

Note to self; Write this down. This is good info to know.

Thanks tjkj2002.

I've heard that Precision made gears for the D30a, but don't know anyone that actually has them.

bugnout wrote:

I've heard that Precision made gears for the D30a, but don't know anyone that actually has them.

The extra front diff I have in the garage has 4.10 Precision in it, got it from a member on here

tommudd wrote:

bugnout wrote:

I've heard that Precision made gears for the D30a, but don't know anyone that actually has them.

The extra front diff I have in the garage has 4.10 Precision in it, got it from a member on here

I called Precision and confirmed they did make 4.10's for the D30A,they actually new the difference(at least the tech I talked to),I was suprised.

CrossBones wrote:

tjkj2002 wrote:

Note to self; Write this down. This is good info to know.

Thanks tjkj2002.

Sport wrote:

CrossBones wrote:

tjkj2002 wrote:

Note to self; Write this down. This is good info to know.

Thanks tjkj2002.

Not writing anything down. If I need to know anything specific I will just come here and ask Troy or TOM (didn't leave you out this time, Big Fella!) :lol:

DryBones wrote:

Sport wrote:

CrossBones wrote:

tjkj2002 wrote:

Note to self; Write this down. This is good info to know.

Thanks tjkj2002.

Not writing anything down. If I need to know anything specific I will just come here and ask Troy or TOM (didn't leave you out this time, Big Fella!) :lol:

funny man! Just messing with ya the last time anyways :wink:

But you know thats the great thing about this site, there is someone on here who has either done it or knows how to do almost anything there is to know about a Jeep or most any vehicle. As well as quite a lot of other things! :lol:

tommudd wrote:

bugnout wrote:

I've heard that Precision made gears for the D30a, but don't know anyone that actually has them.

The extra front diff I have in the garage has 4.10 Precision in it, got it from a member on here

I called Precision and confirmed they did make 4.10's for the D30A,they actually new the difference(at least the tech I talked to),I was suprised.

tjkj2002 wrote:

tommudd wrote:

bugnout wrote:

I've heard that Precision made gears for the D30a, but don't know anyone that actually has them.

The extra front diff I have in the garage has 4.10 Precision in it, got it from a member on here

I called Precision and confirmed they did make 4.10's for the D30A,they actually new the difference(at least the tech I talked to),I was suprised.

I work for Precision Gear. Not sure who you talked to, but Precision Gear dosn't manufacture a 410 gear for the libby 30. We can only get the Dana gear, Part # 84006-5. Curently Dana has them on backorder.

FatCity wrote:

tjkj2002 wrote:

tommudd wrote:

bugnout wrote:

I've heard that Precision made gears for the D30a, but don't know anyone that actually has them.

The extra front diff I have in the garage has 4.10 Precision in it, got it from a member on here

I called Precision and confirmed they did make 4.10's for the D30A,they actually new the difference(at least the tech I talked to),I was suprised.

AAAHHHHHH!!!!!!!!!!!!!!

So Precision only resells Dana/Spicer 4.10's for the D30A as there own then :twisted:

,they just went to the bottom of my list for good place to get gears.

Author:	jsc7002 [ Wed Sep 24, 2008 4:39 pm ]
Post subject:	D30a 4.10 Gears
How can you tell if you have the correct gears or not? I called Reider Racing and said I need 4.10 gears for the front of the Jeep Liberty and I got them today but the box says 30D/410T Dana 30-410 Ring and Pinion Jeep TJ who all makes 4.10 gears for the front?

Author:	tjkj2002 [ Wed Sep 24, 2008 5:47 pm ]
Post subject:	Re: D30a 4.10 Gears
jsc7002 wrote: How can you tell if you have the correct gears or not? I called Reider Racing and said I need 4.10 gears for the front of the Jeep Liberty and I got them today but the box says 30D/410T Dana 30-410 Ring and Pinion Jeep TJ who all makes 4.10 gears for the front? You got the wrong ones,you needed to tell them you needed gears for the D30A or FIA186mm.Dana/Spicer makes the correct gears along with Precision gears.You need to be very specific about the D30A gears and what you ask for.

Author:	CrossBones [ Wed Sep 24, 2008 8:58 pm ]
Post subject:	Re: D30a 4.10 Gears
tjkj2002 wrote: You got the wrong ones,you needed to tell them you needed gears for the D30A or FIA186mm.Dana/Spicer makes the correct gears along with Precision gears.You need to be very specific about the D30A gears and what you ask for. Note to self; Write this down. This is good info to know. Thanks tjkj2002.

Author:	jsc7002 [ Wed Sep 24, 2008 11:35 pm ]
Post subject:
crap! thats what I thouht oh well

Author:	Sport [ Thu Sep 25, 2008 8:20 am ]
Post subject:	Re: D30a 4.10 Gears
CrossBones wrote: tjkj2002 wrote: You got the wrong ones,you needed to tell them you needed gears for the D30A or FIA186mm.Dana/Spicer makes the correct gears along with Precision gears.You need to be very specific about the D30A gears and what you ask for. Note to self; Write this down. This is good info to know. Thanks tjkj2002. X2

LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/

D30a 4.10 Gears http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=36204	Page 1 of 2

Author:	bugnout [ Thu Sep 25, 2008 11:28 am ]
Post subject:
I've heard that Precision made gears for the D30a, but don't know anyone that actually has them.

Author:	tommudd [ Thu Sep 25, 2008 11:39 am ]
Post subject:
bugnout wrote: I've heard that Precision made gears for the D30a, but don't know anyone that actually has them. The extra front diff I have in the garage has 4.10 Precision in it, got it from a member on here

Author:	tjkj2002 [ Thu Sep 25, 2008 12:12 pm ]
Post subject:
tommudd wrote: bugnout wrote: I've heard that Precision made gears for the D30a, but don't know anyone that actually has them. The extra front diff I have in the garage has 4.10 Precision in it, got it from a member on here I called Precision and confirmed they did make 4.10's for the D30A,they actually new the difference(at least the tech I talked to),I was suprised.

Author:	tommudd [ Thu Sep 25, 2008 12:18 pm ]
Post subject:
tjkj2002 wrote: tommudd wrote: bugnout wrote: I've heard that Precision made gears for the D30a, but don't know anyone that actually has them. The extra front diff I have in the garage has 4.10 Precision in it, got it from a member on here I called Precision and confirmed they did make 4.10's for the D30A,they actually new the difference(at least the tech I talked to),I was suprised. Yes always takes you back for a moment when you call somewhere about Liberty parts and the person on the other end knows what you want, most are like "Now thats for what model Jeep...a Liberty...mmmm let me see if we have anything for that model"

Author:	ken [ Thu Sep 25, 2008 5:52 pm ]
Post subject:
Your right, I went to West Coast Differentials this morning to order ARB's front and rear and for them to install and they were like "We've never had anyone request that before where are you taking a Liberty that you would need lockers" and I was all " the same place my 06' Rubi T.J. goes ANYWHERE"

Author:	DryBones [ Thu Sep 25, 2008 5:59 pm ]
Post subject:	Re: D30a 4.10 Gears
Sport wrote: CrossBones wrote: tjkj2002 wrote: You got the wrong ones,you needed to tell them you needed gears for the D30A or FIA186mm.Dana/Spicer makes the correct gears along with Precision gears.You need to be very specific about the D30A gears and what you ask for. Note to self; Write this down. This is good info to know. Thanks tjkj2002. X2 Not writing anything down. If I need to know anything specific I will just come here and ask Troy or TOM (didn't leave you out this time, Big Fella!)

Author:	Drassis [ Thu Sep 25, 2008 6:02 pm ]
Post subject:
Lol i called the local Jeep dealer ship to get a full set of Mopar Skid Plates and the parts guy was like Liberty skid plates he even asked me if i was sure lol than he looked and found them in his database, he was pretty shocked. But hey I still got them ordered

Author:	tommudd [ Thu Sep 25, 2008 6:07 pm ]
Post subject:	Re: D30a 4.10 Gears
DryBones wrote: Sport wrote: CrossBones wrote: tjkj2002 wrote: You got the wrong ones,you needed to tell them you needed gears for the D30A or FIA186mm.Dana/Spicer makes the correct gears along with Precision gears.You need to be very specific about the D30A gears and what you ask for. Note to self; Write this down. This is good info to know. Thanks tjkj2002. X2 Not writing anything down. If I need to know anything specific I will just come here and ask Troy or TOM (didn't leave you out this time, Big Fella!) funny man! Just messing with ya the last time anyways But you know thats the great thing about this site, there is someone on here who has either done it or knows how to do almost anything there is to know about a Jeep or most any vehicle. As well as quite a lot of other things!

Author:	DryBones [ Thu Sep 25, 2008 10:00 pm ]
Post subject:	Re: D30a 4.10 Gears
tommudd wrote: DryBones wrote: Sport wrote: CrossBones wrote: tjkj2002 wrote: You got the wrong ones,you needed to tell them you needed gears for the D30A or FIA186mm.Dana/Spicer makes the correct gears along with Precision gears.You need to be very specific about the D30A gears and what you ask for. Note to self; Write this down. This is good info to know. Thanks tjkj2002. X2 Not writing anything down. If I need to know anything specific I will just come here and ask Troy or TOM (didn't leave you out this time, Big Fella!) funny man! Just messing with ya the last time anyways But you know thats the great thing about this site, there is someone on here who has either done it or knows how to do almost anything there is to know about a Jeep or most any vehicle. As well as quite a lot of other things! Hey, I know you were just having fun last time. We all do it here from time to time. I agree though about all the info that is shared here. I never knew I could learn so much about a vehicle in such a short time.

Author:	ken [ Wed Oct 01, 2008 5:42 pm ]
Post subject:
thanx cuz my jeep is currently on the rack and getting lockers(what I meant to write here was "it's on the rack getting limited slips) installed at west coast diff's. and yeah jimmy called to let me know what you just posted. i'm bummed. but i'll upgrade gears later is all. some of the folks on here insist certain things that are not true. I knew this to be, precision only happened to have a few on their shelf right? now they are sold out.

Author:	Inc [ Wed Oct 01, 2008 5:50 pm ]
Post subject:
Now Ken, remember those aren't lockers, only limited slip diffs. Wouldn't want people to get confused and mislead them.

Author:	ken [ Wed Oct 01, 2008 6:04 pm ]
Post subject:
can you confuse people on here? is it really possible?...... can't be true! O.K. i'm sorry i'll correct it right away.

Page 1 of 2	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/

Author:	FatCity [ Wed Oct 01, 2008 5:05 pm ]
Post subject:
tjkj2002 wrote: tommudd wrote: bugnout wrote: I've heard that Precision made gears for the D30a, but don't know anyone that actually has them. The extra front diff I have in the garage has 4.10 Precision in it, got it from a member on here I called Precision and confirmed they did make 4.10's for the D30A,they actually new the difference(at least the tech I talked to),I was suprised. I work for Precision Gear. Not sure who you talked to, but Precision Gear dosn't manufacture a 410 gear for the libby 30. We can only get the Dana gear, Part # 84006-5. Curently Dana has them on backorder.

Author:	tjkj2002 [ Wed Oct 01, 2008 5:08 pm ]
Post subject:
FatCity wrote: tjkj2002 wrote: tommudd wrote: bugnout wrote: I've heard that Precision made gears for the D30a, but don't know anyone that actually has them. The extra front diff I have in the garage has 4.10 Precision in it, got it from a member on here I called Precision and confirmed they did make 4.10's for the D30A,they actually new the difference(at least the tech I talked to),I was suprised. I work for Precision Gear. Not sure who you talked to, but Precision Gear dosn't manufacture a 410 gear for the libby 30. We can only get the Dana gear, Part # 84006-5. Curently Dana has them on backorder. AAAHHHHHH!!!!!!!!!!!!!! So Precision only resells Dana/Spicer 4.10's for the D30A as there own then ,they just went to the bottom of my list for good place to get gears.

Author:	tommudd [ Wed Oct 01, 2008 5:35 pm ]
Post subject:
tjkj2002 wrote: FatCity wrote: tjkj2002 wrote: tommudd wrote: bugnout wrote: I've heard that Precision made gears for the D30a, but don't know anyone that actually has them. The extra front diff I have in the garage has 4.10 Precision in it, got it from a member on here I called Precision and confirmed they did make 4.10's for the D30A,they actually new the difference(at least the tech I talked to),I was suprised. I work for Precision Gear. Not sure who you talked to, but Precision Gear dosn't manufacture a 410 gear for the libby 30. We can only get the Dana gear, Part # 84006-5. Curently Dana has them on backorder. AAAHHHHHH!!!!!!!!!!!!!! So Precision only resells Dana/Spicer 4.10's for the D30A as there own then ,they just went to the bottom of my list for good place to get gears. OK now thats an interesting turn ...good but never saw that coming