Only thing I needed was a sawzall, 4 2.5in clamps, and a piece of 2.5in pipe since the flowmaster is a lot shorter than the stock muffler. The 2.5in pipe was OD on one end and ID on the other.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Exhaust? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=37011 |
Page 1 of 1 |
| Author: | ObiHann [ Mon Nov 03, 2008 4:02 pm ] |
| Post subject: | Exhaust? |
I'm pricing out a new muffler for my 02 KJ. I'm down to 2, the Flowmaster Super 44 offroad, the 50 suv, or the 50 big block. I want loud, agressive, and mean. I don't want to sound like the civic next to me, I want to sound like a bad stupid truck. deep rumble. So, I need some opinions on mufflers, and also, the specs. I'm told I need the length, the offset, the thickness, and the inlet/outlet size. Where can I track this down? |
|
| Author: | ObiHann [ Mon Nov 03, 2008 4:25 pm ] |
| Post subject: | |
Even more foolish... What about getting the 50 2.5" in dual out... Am I correct in saying the muffler on my Jeep is mounted at the very back, and a dual out wouldn't be a lot of extra work? I just want to clamp this by the way. Will the 50 big block be just as loud as the 44 off road? |
|
| Author: | adamkrz [ Mon Nov 03, 2008 4:57 pm ] |
| Post subject: | |
I was just at the Jeepinbyal.com site and noticed they have a wide array of exhaust systems at reasonable prices. |
|
| Author: | jsc7002 [ Mon Nov 03, 2008 5:08 pm ] |
| Post subject: | |
you need 2.5" in/outlet with the inlet being center and an offset outlet I went with the Thrush Turbo and it sounds good and was cheap |
|
| Author: | tommudd [ Mon Nov 03, 2008 6:16 pm ] |
| Post subject: | |
muffler is not at the back its under the rear passenger seat area, no you do not want a dual outlet, why would you extra work, no performance gains The 50 SUV is a big muffler |
|
| Author: | RAYMAN975 [ Mon Nov 03, 2008 6:18 pm ] |
| Post subject: | |
i got an Edelbrock SDT muffler, it was the same price as the flowmaster, maybe a little cheaper, i like it, 2.5 center in, 2.5 center out |
|
| Author: | ObiHann [ Mon Nov 03, 2008 6:21 pm ] |
| Post subject: | |
so whats louder, the super 44 offroad, or the 50 suv? I'm likely going to get the super 44, but still not decided. |
|
| Author: | tommudd [ Mon Nov 03, 2008 6:25 pm ] |
| Post subject: | |
44 is louder |
|
| Author: | ObiHann [ Mon Nov 03, 2008 6:29 pm ] |
| Post subject: | |
sold. Like I said, I want to be able to pull up to a stock liberty at a red light, rev the engine, and make them look in suprise. I want to break the sterotype of a cute little jeep that is for soccer moms, and my first step is making it sound mean. |
|
| Author: | Xodius [ Tue Nov 04, 2008 4:27 pm ] |
| Post subject: | |
ObiHann wrote: sold. Like I said, I want to be able to pull up to a stock liberty at a red light, rev the engine, and make them look in suprise. I want to break the sterotype of a cute little jeep that is for soccer moms, and my first step is making it sound mean.
hehe once you do that post a sound clip, I want to hear that bad boy. |
|
| Author: | Sport [ Tue Nov 04, 2008 4:43 pm ] |
| Post subject: | |
I saw a jeep the other day that had a Rancho muffler, I haven't looked into though but thought it was interesting. |
|
| Author: | ObiHann [ Tue Nov 04, 2008 5:42 pm ] |
| Post subject: | |
Ordered it tonight, will pick it up saturday, installing it monday. darn I cant wait! Pics and vids to come! |
|
| Author: | ObiHann [ Wed Nov 05, 2008 8:25 am ] |
| Post subject: | |
Picking up the require tool(s) today, since I'm going to bolt it on, what do you guys think, a angle grinder, a few clamps and a coupler? |
|
| Author: | Jeepjeepster [ Wed Nov 05, 2008 1:19 pm ] |
| Post subject: | |
Only thing I needed was a sawzall, 4 2.5in clamps, and a piece of 2.5in pipe since the flowmaster is a lot shorter than the stock muffler. The 2.5in pipe was OD on one end and ID on the other.
|
|
| Author: | RAYMAN975 [ Wed Nov 05, 2008 2:05 pm ] |
| Post subject: | |
hey jeepjeepster,your skid needs paint touched up, as well as your driveshaft has rust on it, shame on you!!! get that fixed ASAP!!! hahaha just playing  
|
|
| Author: | ObiHann [ Wed Nov 05, 2008 2:39 pm ] |
| Post subject: | |
How long a piece of pipe did you use? |
|
| Author: | jsc7002 [ Wed Nov 05, 2008 10:40 pm ] |
| Post subject: | |
his had some rust but then he got bored one day, and pulled it off and cleaned and painted it |
|
| Author: | peterepete [ Wed Nov 05, 2008 11:26 pm ] |
| Post subject: | |
holy crap the axle is still black.  I wish mine was still like that i got orange all around. Darn buffalo snow salt 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|