Fender flares INFO

setep · **Posted:** Fri Nov 07, 2008 4:43 am

Hi everybody,please, ild to know if it is possible to to cut fender flare (to obtain more excursion on twist) and if there are some kind of after market fender.
thanks a lot for yours answers.

Luca Torino-Italy

sorry i posted already but in a wrong place.

_________________

jeepkj02 · **Posted:** Fri Nov 07, 2008 10:06 am

Sorry, there are no aftermarket flares available for the Liberty, from your avatar it looks like you already did some cutting, looks good, might want to cut the splash guard to finish it off.

setep · **Posted:** Fri Nov 07, 2008 2:35 pm

thanks a lot!so there are no way.only one is SFA.... :roll:

durangotang · **Posted:** Fri Nov 07, 2008 4:29 pm

Nothing is available... you have to make it (see sig pic)

Guest · **Posted:** Fri Nov 07, 2008 4:49 pm

i'd like to see someone buy these and see if they can make them fit
http://www.bushwacker.com/

gone_jeepin · **Posted:** Sat Nov 08, 2008 10:44 am

Those bush wacker one's look like they might just fit without too much modification. As for cutting the fender flairs you still have to clear the actual metal body under there so cutting them too much won't net you any gain.

tjkj2002 · **Posted:** Sat Nov 08, 2008 10:47 am

The rear might work with some mods but those fronts will not.Have you noticed that the front flares on a KJ are thinner towards the back and wider towards the front? The front end of the KJ is kinda shaped like a arrow.

setep · **Posted:** Sat Nov 08, 2008 11:49 am

thanks to you all,in fact i saw that i've to cut too much metal body,but at the end, i've not gained so much excursion.

Fender flares INFO

Who is online