I have the same problem with my right rear rancho shock... the bolt hole seems to be bigger than the bolt
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| what is that noise? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=37204 |
Page 1 of 1 |
| Author: | Sport [ Sun Nov 09, 2008 7:49 pm ] |
| Post subject: | what is that noise? |
So after replacing my lift I am not getting the rattling noise whenever I hit some small bumps. I have checked the sway bar and made sure everything was on tight. I can't quite firgure it out, what do you think it might be?? Thanks. |
|
| Author: | jeepkj02 [ Sun Nov 09, 2008 8:04 pm ] |
| Post subject: | |
What rear shocks did you use?? |
|
| Author: | durangotang [ Sun Nov 09, 2008 8:36 pm ] |
| Post subject: | |
I have the same problem with my right rear rancho shock... the bolt hole seems to be bigger than the bolt
|
|
| Author: | tommudd [ Sun Nov 09, 2008 8:47 pm ] |
| Post subject: | |
I had one of the lifts I done have a noise in the left front, could not find it, took it all back apart checked everything, put it back together and no more noise?????  She has put about ten thousand on it now no problems, so you may just need to go back through, loosen / retighten / recheck . The top bolts if not torqued right to spec will make a heck of a noise as well, they will appear tight but check that as well, PITA to pull the battery to do it, but if you are like me I hate any noise 
|
|
| Author: | skeeter [ Sun Nov 09, 2008 9:09 pm ] |
| Post subject: | |
I have the same problem... I used Rusty's shocks... which from what I am reading is the problem. I've tried extra washers around the bolt but it is not helping... Looks like the hole that is in the shock is to big for the stock bolts even with the spacer installed. |
|
| Author: | Sport [ Sun Nov 09, 2008 9:36 pm ] |
| Post subject: | |
I didn't change the rear, only the front. the noise is on the drivers side. |
|
| Author: | Jeepjeepster [ Sun Nov 09, 2008 11:36 pm ] |
| Post subject: | |
tommudd wrote: I had one of the lifts I done have a noise in the left front, could not find it, took it all back apart checked everything, put it back together and no more noise?????
She has put about ten thousand on it now no problems, so you may just need to go back through, loosen / retighten / recheck . The top bolts if not torqued right to spec will make a heck of a noise as well, they will appear tight but check that as well, PITA to pull the battery to do it, but if you are like me I hate any noise Ive had that happen before too, I posted about it on here. Sounded like a CV joint was going bad and it was LOUD when turning left. Took the rotor and such off so I could check everything out and couldnt find a problem. Put it all back together and its been fine since(+10k miles). 
|
|
| Author: | Sport [ Mon Nov 10, 2008 9:20 am ] |
| Post subject: | |
ok, I will go through it again. It is nice and quiet on the road but when I ride over bumps that make the jeep bounce around a little the noise sounds like something is bobbling around. Driving me crazy. |
|
| Author: | tommudd [ Mon Nov 10, 2008 12:17 pm ] |
| Post subject: | |
did you mount a bobble head under the hood 
|
|
| Author: | ken [ Mon Nov 10, 2008 1:19 pm ] |
| Post subject: | |
I have had that problem for years as well . I have the Crusty's 2.5". The best I could guess is that the strut spacer bolts were too long & hitting the strut mounting bolts up above spacer. Where you bolt spacer to body area.Under the battery tray. I havent heard anyone complain about it until now, I was just going to swap to ome when I could afford it. I havent noticed any performance issues on trails, only when I hit speed bumps at 25 it makes a clackity clack noise. |
|
| Author: | Sport [ Sun Nov 16, 2008 12:12 pm ] |
| Post subject: | |
well, it is the front left strut assembly. I took it apart and put it back together and its still making noise when I compress it. I believe it is the strut itself, the other side is nice and quiet. I just bought it, what should I do? |
|
| Author: | tommudd [ Sun Nov 16, 2008 12:32 pm ] |
| Post subject: | |
if its the strut itself take it back or contact where you you got it from, I know you did check but...is it installed correctly? Just checking every angle 
|
|
| Author: | Sport [ Sun Nov 16, 2008 1:43 pm ] |
| Post subject: | |
tommudd wrote: if its the strut itself take it back or contact where you you got it from, I know you did check but...is it installed correctly? Just checking every angle
yes, I took the whole thing apart and put it back together again. it is together right. |
|
| Author: | LostRenegade [ Sun Nov 16, 2008 4:55 pm ] |
| Post subject: | |
Sport wrote: well, it is the front left strut assembly. I took it apart and put it back together and its still making noise when I compress it. I believe it is the strut itself, the other side is nice and quiet. I just bought it, what should I do?
I have a similar problem, but my struts are old and warn. I am about to replace it with a Frankenlift. 
|
|
| Author: | aandlwoods [ Tue Nov 18, 2008 9:35 pm ] |
| Post subject: | |
get the Al's 4 inch lift and then send it to me... |
|
| Author: | Sport [ Thu Nov 20, 2008 1:40 pm ] |
| Post subject: | |
Has anyone spoken to Marlin at JBA? I have sent him a few emails and a phone call about my strut but he hasn't replied. Usually he is pretty good with that? |
|
| Author: | LostRenegade [ Thu Nov 20, 2008 1:51 pm ] |
| Post subject: | |
yes, I traded some e-mail with him about his a arm upgrade. |
|
| Author: | Sport [ Thu Nov 20, 2008 2:05 pm ] |
| Post subject: | |
LostRenegade wrote: yes, I traded some e-mail with him about his a arm upgrade.
Of course. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|