Could anyone tell me the dimensions of the base of hi-lift jack? thanks!

_________________
-Jon-
02 Jeep Liberty - LOST Trail Tested Edition - sold
09 VW Tiguan 4motion - current

do you mean the attached base or the base stand (sold separately)?

_________________
2004 KJ Sport 4x4 Black
245/70/16 Grabber AT2's
2.5" Daystar Spacer Lift w/ Ranchos
Mopar Skids
Hi-Lift
http://www.cardomain.com/ride/3202356

The metal base on mine is 4.125" x 7.125"

_________________
2008 Xterra 4x4

1986 CJ7
Lots of custom stuff...

Gone, But not Forgotten...
2003 Sport - 'Fire Engine' Red
Detours KJ Backbone
Skids
Boulder Bars
JBA 4.5 A Arms
245/75/16 Wrangler Duratracs's on Cragar Soft 8’s
Spidertrax 1.25" Spacers
Superwinch LP 8500
Frankenlifted

Thanks, yeah that's what I was looking for. I'm thinking of getting the hi-lift off road base to use with my stock bottle jack, but need to see if it will fit. I mostly want it to give enough height to the stock jack to actually use it again with the lift. But I don't really want to get a hi-lift for a variety of reasons.

_________________
-Jon-
02 Jeep Liberty - LOST Trail Tested Edition - sold
09 VW Tiguan 4motion - current

I'll take a look at mine when I get home, but offhand I don't think you'll gain much height. Maybe an inch if that. Plus, stability would be a concern for me. Even the hi-lift doesn't sit very far down in the base. I think you're better off using a block of wood.

EDIT: Well, I was sure wrong. It's almost 3 inches in height that you'd get, assuming the bottle jack fits. But a block of wood is still cheaper.

_________________
2002 KJ (un)Limited 4x4: OME HD lift, ARB bullbar, Warn 4X flood lights, Skid Row tranny skid, Mopar engine, transfer case and fuel tank skids, Boulder Bars, 245/75/16 Goodyear Duratracs on Moab wheels.