| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Location for Switches http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=39790 |
Page 1 of 2 |
| Author: | dieselenthusiast [ Sun Feb 01, 2009 3:52 pm ] |
| Post subject: | Location for Switches |
Has there been anyone who has used the tray to mount switches. It looks like there would be enough room to mount at least 4 switches. I’d be willing to pay someone to fabricate a custom panel that would fit nicely in the tray area. Maybe long_tall_Texan would be interested in another project! 
|
|
| Author: | Guest [ Sun Feb 01, 2009 4:28 pm ] |
| Post subject: | |
DE, I've been looking for an '03+ KJ bezel for that very reason. If I get one and build something, I'll let you know |
|
| Author: | dieselenthusiast [ Sun Feb 01, 2009 4:52 pm ] |
| Post subject: | Good News |
Ladies and Gentlemen, I just received a PM from our “Custom Cold Air Intake” fabricator, known as long_tall_Texan, and he is willing to help us out. I’ll be drawing up a few sketches and get the ball rolling. 
|
|
| Author: | Blue KJ in PA [ Sun Feb 01, 2009 5:19 pm ] |
| Post subject: | |
I vaguely remeber someone doing this in the past, but I'm talking long, long time ago on the old server... Looking forward to see what comes up this time...Would be a good use for a currently useless spot. |
|
| Author: | dieselenthusiast [ Sun Feb 01, 2009 6:11 pm ] |
| Post subject: | |
Blue KJ in PA wrote: Would be a good use for a currently useless spot.
Amen............. I’m hoping that we can select a particular set of switches that will be well-liked and useful for many users. It would make sense if a universal switch plate was made for all who want this type of set-up. Once the fabrication is underway, then it will be all about fit and function. Therefore, I will be looking at good quality switches that will work for many applications (lockers, compressors, lights, etc.). |
|
| Author: | KJ kyle [ Mon Feb 02, 2009 1:44 am ] |
| Post subject: | |
i made one for my truck a year or two ago, i used 1/4" "starboard" from a marina. it turned out good. |
|
| Author: | tommudd [ Mon Feb 02, 2009 1:53 am ] |
| Post subject: | |
dieselenthusiast wrote: Blue KJ in PA wrote: Would be a good use for a currently useless spot. Amen............. I’m hoping that we can select a particular set of switches that will be well-liked and useful for many users. It would make sense if a universal switch plate was made for all who want this type of set-up. Once the fabrication is underway, then it will be all about fit and function. Therefore, I will be looking at good quality switches that will work for many applications (lockers, compressors, lights, etc.). too sleepy to find it now but I gave thunderbird junkie a list of places to buy quality switches last week or so |
|
| Author: | Guest [ Mon Feb 02, 2009 1:55 am ] |
| Post subject: | |
I'll be using SPST Carling Contura switches http://www.otrattw.com/products.php?cat=12 |
|
| Author: | tommudd [ Mon Feb 02, 2009 2:00 am ] |
| Post subject: | |
ThunderbirdJunkie wrote:
Thats it , Over The River And Through The Woods 
great switches and everyone says this guy has great service I like the looks of his TJ switch panel if we could get something like that made up
|
|
| Author: | 0311_DoC [ Tue Apr 07, 2009 1:04 am ] |
| Post subject: | |
Any Updates on this? |
|
| Author: | JeepinJarhead03 [ Tue Apr 07, 2009 1:09 am ] |
| Post subject: | |
bah i just used that space to mount my bell 3 port 12v sockets hehe |
|
| Author: | Boiler [ Tue Apr 07, 2009 2:18 am ] |
| Post subject: | |
I'd use this spot for my upcoming switch installs if I knew how to mount a panel in there or could find one already made up. Will be watching for updates too. |
|
| Author: | JeepinJarhead03 [ Tue Apr 07, 2009 3:20 am ] |
| Post subject: | |
theres a lip, and a screw or two in the back take it out, trace it, take a piece of diamond plate or something, cut it to shape until it sits in the lip and around the 12v plug, find a screw that will reach the hole in the backing there, find a piece of aluminum bar scrap cut it to length and drill it larger dia than the screw and use that for structural support, knock a hole in the back of the oem pocket for wiring and use a dremel to cut squares in the front and trim them till ya switches fit sounds very doable to me boiler between the lip and the screw and fitting around the 12v plug the plate wont go anywhere |
|
| Author: | Boiler [ Tue Apr 07, 2009 4:42 pm ] |
| Post subject: | |
guy that does my machining has an engraver too. Looks like I may have to overdo this one... |
|
| Author: | JeepinJarhead03 [ Tue Apr 07, 2009 4:46 pm ] |
| Post subject: | |
dude.. i seriously think i was asleep when I wrote that last post, i do not remember posting it i'd do it too but I want my switches somewhere I don't have to lean to get to |
|
| Author: | KY Liberty [ Tue Apr 07, 2009 6:28 pm ] |
| Post subject: | |
I put Moroso switches where the ash tray was on my '02. 
|
|
| Author: | JeepinJarhead03 [ Tue Apr 07, 2009 7:24 pm ] |
| Post subject: | |
those moroso's look just like the daystar switches ive seen |
|
| Author: | oddball [ Tue Apr 07, 2009 7:31 pm ] |
| Post subject: | |
I was actually thinking of mounting a switch or two within the ashtray container itself. Basically I would make a plate that fit right below the ashtray lip after cutting out the plastic cigarette holder portion inside and fab behind it as needed. That way my switches would be hidden when the ashtray was closed and the dash would remain stock looking. |
|
| Author: | ATXKJ [ Tue Apr 07, 2009 8:35 pm ] |
| Post subject: | |
FYI - for smaller switches - gmctd's version works well 
|
|
| Author: | Boiler [ Wed Apr 08, 2009 12:27 am ] |
| Post subject: | |
JeepinJarhead03 wrote: i'd do it too but I want my switches somewhere I don't have to lean to get to
Ha, I actually had the same thought today as I was checking out the location on the way home. |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|