Ok guys, I'm in kinda a hurry to take the time and search, but is their another way of doing the axle shaft bearings with out the special miller tools? Don't worry it's not the KK.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Axle bearing http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=41250 |
Page 1 of 1 |
| Author: | Diggerfreek [ Mon Mar 16, 2009 7:47 pm ] |
| Post subject: | Axle bearing |
Ok guys, I'm in kinda a hurry to take the time and search, but is their another way of doing the axle shaft bearings with out the special miller tools? Don't worry it's not the KK.
|
|
| Author: | tjkj2002 [ Mon Mar 16, 2009 7:57 pm ] |
| Post subject: | |
What kind of axle? Front or rear? Semi-float or full float? I have these with a slide hammer(pic below) for semi-float(like the 8.25 axle) for the axle bearings,works very well. 
|
|
| Author: | Diggerfreek [ Mon Mar 16, 2009 7:59 pm ] |
| Post subject: | |
rear on my buddies crd |
|
| Author: | tjkj2002 [ Mon Mar 16, 2009 8:01 pm ] |
| Post subject: | |
Diggerfreek wrote: rear on my buddies crd Then the above pic of the bearing pullers will work.Check with Advance Auto Parts,you can rent a slide hammer kit that has those in it,makes it real easy to remove.I just uses a huge socket to drive new bearing back in but I now have the proper bearing install tools.
|
|
| Author: | Diggerfreek [ Mon Mar 16, 2009 8:04 pm ] |
| Post subject: | |
Thanks Troy... Have you ever purchased any thing from alljeep.com? They have the cheapest price on yukon axle shafts |
|
| Author: | tjkj2002 [ Mon Mar 16, 2009 8:09 pm ] |
| Post subject: | |
Diggerfreek wrote: Thanks Troy... Have you ever purchased any thing from alljeep.com? They have the cheapest price on yukon axle shafts No,make sure you get the KJ specific 29 spline axles,there are about 4 different lengths of 8.25 axles.I paid $114 each from 4 Wheel Parts in early '06.
|
|
| Author: | Diggerfreek [ Mon Mar 16, 2009 8:11 pm ] |
| Post subject: | |
http://www.alljeep.com/oscommerce/product_info.php?products_id=169368 |
|
| Author: | tjkj2002 [ Mon Mar 16, 2009 8:15 pm ] |
| Post subject: | |
That's a good price,about the same as I paid.Remember to get new wheel studs,plus these axles do not come with tone rings for ABS(applies to '06/'07 KJ's only).They might now but did not in '06 when I bought mine. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|