| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| rear end sagging http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=41449 |
Page 1 of 1 |
| Author: | crazykj [ Sun Mar 22, 2009 10:27 am ] |
| Post subject: | rear end sagging |
what can i use for spacers on rear of jeep to lift it back to were it was |
|
| Author: | JeepinJarhead03 [ Sun Mar 22, 2009 12:35 pm ] |
| Post subject: | |
an extra spring isolator, don't go above 3 total iso's per side, most say put the iso on the top of the spring, tommud is the only one i can think of that has extra on the bottom without issues |
|
| Author: | jsc7002 [ Sun Mar 22, 2009 1:39 pm ] |
| Post subject: | |
how much has it sagged? do you have a lift? |
|
| Author: | scout [ Sun Mar 22, 2009 4:57 pm ] |
| Post subject: | |
Post a pic of the side. |
|
| Author: | crazykj [ Mon Mar 23, 2009 6:26 pm ] |
| Post subject: | |
got a 3 inch rough country lift i think the springs in rear settled but i want to get about another inch of lift in back |
|
| Author: | tommudd [ Mon Mar 23, 2009 6:42 pm ] |
| Post subject: | |
so you have the stock rears then? |
|
| Author: | crazykj [ Mon Mar 23, 2009 9:55 pm ] |
| Post subject: | |
no got rough country rear coil spring were can i get a rear isolator |
|
| Author: | tommudd [ Mon Mar 23, 2009 10:03 pm ] |
| Post subject: | |
dealer |
|
| Author: | crazykj [ Mon Mar 23, 2009 10:14 pm ] |
| Post subject: | |
how thick are the isolators cause im running 265/75/16 tires and at almost full flex they rub in rear at front of fender. there fine on the front no inner fenders and custom bumper |
|
| Author: | Guest [ Mon Mar 23, 2009 10:25 pm ] |
| Post subject: | |
crazykj wrote: how thick are the isolators cause im running 265/75/16 tires and at almost full flex they rub in rear at front of fender. there fine on the front no inner fenders and custom bumper
1 isolator = 0.5 inches |
|
| Author: | dieselenthusiast [ Tue Mar 24, 2009 2:14 am ] |
| Post subject: | |
|
|
|
| Author: | Inc [ Tue Mar 24, 2009 2:26 am ] |
| Post subject: | |
This place was cheaper than my dealer, even with shipping. http://www.trademotion.com/partlocator/ ... atalogid=0 |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|