LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Daystar front OME rear
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=41879		 Page 1 of 1
Author:  Quicksilversurf917 [ Sat Apr 04, 2009 8:58 am ]
Post subject:  Daystar front OME rear
I was wondering if you could possibly do a daystar 2.5" spacer upfront and OME rear springs? The reason why I ask is that I notice that my rear is starting to sag but the front still lookes perfectly fine. so could I just ditch the rear spacer and springs and just throw on OME rear coils and then replace the front when I get the money and then do a clevis lift upfront if the rear gets too high? Money is pretty tight around here right now so im trying to do something small.
Author:  tommudd [ Sat Apr 04, 2009 9:03 am ]
Post subject: 
Sure that will work. No problems, heading in the right direction :wink:
Author:  jsc7002 [ Sat Apr 04, 2009 2:39 pm ]
Post subject: 
tommudd wrote:
heading in the right direction :wink:


slowly but surely, huh Tom?
Author:  Quicksilversurf917 [ Sat Apr 04, 2009 3:07 pm ]
Post subject: 
lol yea I wanted something for the time being and I put on so many miles in such little time, I think I put on 1000 miles in like 12 days at one point in time.... but overall im at 60,300 or so miles on the jeep so ya kno I might as well come over to the good side and get my stuff done to last me a long time
Author:  Quicksilversurf917 [ Sat Apr 04, 2009 5:16 pm ]
Post subject: 
should I go with the HD's or MD's? like could I mix my front stock coild with HD coils or would that be too uneven for the ride and stiffness situatiuon?
Author:  JeepinJarhead03 [ Sat Apr 04, 2009 5:18 pm ]
Post subject: 
ya mean mix front stock shocks with HD coils?
Author:  Quicksilversurf917 [ Sat Apr 04, 2009 6:37 pm ]
Post subject: 
sorry let me refraise that....

Would it be ok to mix stock front coils with rear OME HD coils? or would the ride be too uneven?
Author:  ATXKJ [ Sat Apr 04, 2009 6:39 pm ]
Post subject: 
lots of CRD's ran that way until OME developed the 790 for the front.

works okay - but full OME is better.
Author:  Quicksilversurf917 [ Sat Apr 04, 2009 6:42 pm ]
Post subject: 
ATXKJ wrote:
lots of CRD's ran that way until OME developed the 790 for the front.

works okay - but full OME is better.

I kno full OME is better, you dont even have to tell me that once anymore. Its just money is so tight bc i'm currently out of work for right now and I have a trip to disney that my family and I are making in May and then I have senior week in June and then college this fall....so its like I have to save my money some how..... :?
Author:  tommudd [ Sat Apr 04, 2009 7:29 pm ]
Post subject: 
Ride may seem uneven at first due to the coils front and rear sagging already,( and you are used to the ride that way) But you could go ahead at this time and replace the rears with Heavy Dutys and continue upon your trip.
I assume ( always hate to do that but :wink: ) you have longer rear shocks since its been lifted for a while?
Author:  Quicksilversurf917 [ Sat Apr 04, 2009 10:32 pm ]
Post subject: 
yea I got the rancho RSX's all around
Author:  tommudd [ Sun Apr 05, 2009 12:12 am ]
Post subject: 
cool just go for it and you'll be OK
Author:  Quicksilversurf917 [ Sun Apr 05, 2009 9:36 am ]
Post subject: 
sweet, thanks Tom, what would I do without you? :D :wink:
Author:  Citchie [ Fri Dec 07, 2012 12:10 am ]
Post subject:  Re: Daystar front OME rear
What do you guys think about the ome 927 up front with blister shocks, and the rear the 2.5" daystar block,
Author:  tommudd [ Fri Dec 07, 2012 12:14 am ]
Post subject:  Re: Daystar front OME rear
Citchie wrote:
What do you guys think about the ome 927 up front with blister shocks, and the rear the 2.5" daystar block,


Could run that way for a short time
but if you are buying the spacer for the rear wouldn't save that much, still have to buy longer rear shocks
OME 927 and Bilsteins work good
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/