| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| stock bumper http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=42115 |
Page 1 of 2 |
| Author: | jeepmedic46 [ Fri Apr 10, 2009 3:32 pm ] |
| Post subject: | stock bumper |
Any one know how much the stock bumper weighs? My bumper got damaged and may be able to get a ARB bumper and was wondering if the stock suspension would handle the arb bumper. |
|
| Author: | tommudd [ Fri Apr 10, 2009 3:38 pm ] |
| Post subject: | |
stock bumper maybe 15 pounds or so, ARB bumper 100 , stock suspension will never handle it even if it would be brand new. |
|
| Author: | KJ kyle [ Fri Apr 10, 2009 3:58 pm ] |
| Post subject: | |
i think 15lbs is a little much.... |
|
| Author: | tommudd [ Fri Apr 10, 2009 4:02 pm ] |
| Post subject: | |
KJ kyle wrote: i think 15lbs is a little much....
well I was thinking of mine when I removed it, with the factory fogs, license plates still on, dead bugs....... so it weighed a little more |
|
| Author: | RAYMAN975 [ Fri Apr 10, 2009 5:38 pm ] |
| Post subject: | |
i have taken my front bumper off a couple times, and it is pretty hefty for just being plastic, 10-15lbs is probably close. its got the outer bumper cover, then the inner black plastic., same as the rear, has the inner black plastic. |
|
| Author: | jsc7002 [ Fri Apr 10, 2009 9:47 pm ] |
| Post subject: | |
I would say Tom is about right on the weight, and there is no way a ARB will sit right on the OEM suspension. |
|
| Author: | Guest [ Sat Apr 11, 2009 3:23 am ] |
| Post subject: | |
Is your insurance paying for it? If you can get the arb now then go for it. You can always upgrade your suspension later. |
|
| Author: | jeepmedic46 [ Sat Apr 11, 2009 4:56 am ] |
| Post subject: | |
Thats what I was going to do, Have the ins pay for it. Probably not getting the suspension till next year. |
|
| Author: | SweepnChoke [ Sat Apr 11, 2009 8:56 am ] |
| Post subject: | |
I had the ARB on stock suspension for short while. My struts were already shot, felt like you were driving a waterbed even before the ARB was installed. And actually the added weight of the ARB seemed to dampen the waterbed feel instead of increase it as I expected. |
|
| Author: | Drassis [ Sat Apr 11, 2009 11:09 am ] |
| Post subject: | |
If you can just upgrade the front suspension, either that or go for one of the t-17 bumpers Rustys selling them out for 450 right now, not as good as a ARB though |
|
| Author: | jeepmedic46 [ Sat Apr 11, 2009 11:17 am ] |
| Post subject: | |
Would my stock suspension handle a rustys bumper? |
|
| Author: | Guest [ Sat Apr 11, 2009 3:06 pm ] |
| Post subject: | |
icefisher45 wrote: Would my stock suspension handle a rustys bumper?
I think the t17 bumper is only for 05+ years of kj. I don't see a listing for 02-04 on their website. |
|
| Author: | jsc7002 [ Sat Apr 11, 2009 5:22 pm ] |
| Post subject: | |
I think it is only for the 05+ but if would still be more weight than the suspension can handle |
|
| Author: | JeepinJarhead03 [ Sun Apr 12, 2009 11:52 pm ] |
| Post subject: | |
wouldn't be the first time one of us has fit something that "wasn't for our year model or even for a jeep" |
|
| Author: | Wasatch15 [ Mon Apr 13, 2009 7:32 am ] |
| Post subject: | |
I installed the ARB before the Frankenlift and drove it that way for at least 6 months before upgrading. Yes, the suspension did sag slightly but it gave me time to save for the Frankie. |
|
| Author: | jeepmedic46 [ Mon Apr 13, 2009 11:27 am ] |
| Post subject: | |
I think I might go with the Detour Backbone at this time. |
|
| Author: | RED_KJ_666 [ Mon Apr 13, 2009 12:03 pm ] |
| Post subject: | |
Ok so say I buy a T17 bumper for my 2004. I loose my turn signals so I was just looking at pictures and thought to myself can us Pre-05 guys Run a t17 but just put 05+ Fender flares and 05+ turns? will this work as a direct bolt on and does anyone know of someone who may have tried? |
|
| Author: | jeepmedic46 [ Mon Apr 13, 2009 1:53 pm ] |
| Post subject: | |
Don't know, good idea though. What is a t17 bumper? |
|
| Author: | jsc7002 [ Mon Apr 13, 2009 3:29 pm ] |
| Post subject: | |
icefisher45 wrote: Don't know, good idea though. What is a t17 bumper?
thats made by TJM here are some pics of it: http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=41025 |
|
| Author: | KJ in CO [ Mon Apr 13, 2009 5:17 pm ] |
| Post subject: | |
When upgrading the front bumper and it is heavier, how do you chose which would be a suitable suspension upgrade for the vehicle? I got a daystar puck kit on mine right now and now I will have to upgrade sometime, givin the fact my list of add ons never stops. |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|