Transfer shift lever does nothing.

simpleton · **Joined:** Sat Dec 24, 2005 12:51 pm **Posts:** 3

I have a 05 Liberty Sport and I have a problem with the transfer case shift lever. When I try and shift into 4 HI or 4 Low it does nothing. The lever has almost no resistance. Has anyone had any similar problems? Perhaps a problem with the linkage? The jeep came with the 7 year 70K powertrain warenty but I don't know that would cover this or if that warenty even still exists after the bailout.

JeepinJarhead03 · **Posted:** Tue Jun 02, 2009 12:43 pm

ya linkage came loose, crawl up under there and put it back

teckman02 · **Posted:** Tue Jun 02, 2009 12:45 pm

i had this happen to me it was and it was replaced with no problem

simpleton · **Joined:** Sat Dec 24, 2005 12:51 pm **Posts:** 3

teckman02 wrote:

i had this happen to me it was and it was replaced with no problem

Replaced as in replaced the cable or replaced as in put back together?

tjkj2002 · **Posted:** Tue Jun 02, 2009 2:21 pm

Well since your tax dollars are covering the warranty anyways I doubt it will get covered by a powertrain warranty that only covers internally lubricated parts which the shifter cable is not.

Just save the headache and crawl under your jeep and check the t-case end,hook back up if it is not broken or replace the $50 cable that takes about 30mins to R&I.

Transfer shift lever does nothing.

Who is online