LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Show me your superskinks
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=43340		 Page 1 of 1
Author:  Fouros [ Wed May 20, 2009 12:23 am ]
Post subject:  Show me your superskinks
whether they be on an 02-04 or an 05+ or even a KK

i want to see your superskinks installed on your Jeep



(please)

i am just about to install mine :D
Author:  JeepinJarhead03 [ Wed May 20, 2009 12:30 am ]
Post subject: 
been browsing motion offroad? :P
Author:  Guest [ Wed May 20, 2009 12:34 am ]
Post subject: 
I'd like to see your super skinks too ................. but on my vehicle :lol:
Author:  Diggerfreek [ Wed May 20, 2009 12:51 am ]
Post subject: 
Image
Image
Author:  Tokyojoe [ Wed May 20, 2009 2:00 am ]
Post subject: 
Image

Image

My skinks are the very first skinks made (prototype) then about 2 yrs later, I had him weld on the super skink bars to mine.

You may encounter that your pinch seams are not equal all the way across. We discovered that they can be longer at one end and get shorter at the other. Goofy KJ framing. Don't be discouraged if you have to drill holes that cut into the edge of the seam and is not a solid hole. See pictures below. You can see the length difference.

Image

Image
Author:  Diggerfreek [ Wed May 20, 2009 2:03 am ]
Post subject: 
My story is the same as Tokyojoe's except my set was completed as supers the first time around
Author:  riptricket [ Wed May 20, 2009 9:25 am ]
Post subject: 
Just a couple that I have!
Image
Image
Image
Image
Image
Author:  Blue KJ in PA [ Wed May 20, 2009 10:58 am ]
Post subject: 
The ones I got from EODKJ when he sold out to go back to school. All but maybe 2 holes lined up just right.



Image
Author:  KJ 119 [ Thu May 21, 2009 10:18 pm ]
Post subject: 
Image
Author:  BjBnet [ Thu May 21, 2009 11:22 pm ]
Post subject: 
man I love those things.
The Canadian dollar is climbing up again so I might be able get me a set before the summer is over :lol:
TokyoJoe, thanks for those pics. I had never seen the pinch welds drilled before, evrybody posts pics of rock rails from a side view, I'd love to see more from underneath where they actually mount on the frame if anyone has some.
Author:  KY Liberty [ Sun May 24, 2009 12:02 pm ]
Post subject: 
Here's mine with Line-X Xtra.

Image

Image

Image
Author:  LostEddie [ Sun May 24, 2009 7:56 pm ]
Post subject: 
If this opens in the middle, scroll back to the top.
http://www.lostjeeps.com/forum/phpBB3/vie ... ht=#277248
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/