LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

gauge pod
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=43629		 Page 1 of 1
Author:  rt_power [ Thu May 28, 2009 8:45 pm ]
Post subject:  gauge pod
just wondering if anyone out there would have pics or owns one of the neutral beige pods from Lotek?? i am on the verge of buying one and need to see if it will match to the current white/ off white A pillar.
Author:  daspes [ Thu May 28, 2009 10:50 pm ]
Post subject:  Re: gauge pod
rt_power wrote:
just wondering if anyone out there would have pics or owns one of the neutral beige pods from Lotek?? i am on the verge of buying one and need to see if it will match to the current white/ off white A pillar.

Dunno, Never seen an interior that wasn't Gray or Black in a KJ... There are a few threads here with members who have those two colors though, not sure if that helps.
Author:  tumanator [ Fri May 29, 2009 12:28 am ]
Post subject: 
lol, my lower interior is grey, and my upper interior (everything above the dash to the roof) is that same tan color. I didn't even notice that until I started looking into upgrading to an EVIC. I'm no help to your question, but I do have the same Color :wink:
Author:  JJsTJ [ Fri May 29, 2009 9:31 am ]
Post subject: 
The lotek matches the stock pillars. I have one siting here that Was for sale, you just missed it.
Author:  KY Liberty [ Fri May 29, 2009 8:20 pm ]
Post subject: 
If you have the light taupe, it matches very closely.

Image
Author:  JMSMN [ Fri May 29, 2009 9:26 pm ]
Post subject: 
Sure wish they made a set a gouge pods for the 06' libbys. :?
Author:  Guest [ Fri May 29, 2009 9:27 pm ]
Post subject: 
interiors of the 02-7s are pretty much identical...
Author:  LibertyFever [ Fri May 29, 2009 9:43 pm ]
Post subject: 
KY Liberty wrote:
Image


Yeah right, NOS in a Libby :lol:


Just this evening I was thinking that the instrument panel in the Libby lacks some gauges. Maybe I'll pay the $39.99 (plus $7.99 for the color) for one of these gauge pods. Any opinion on what gauges one should mount in it? other than the NOS gauge :?
Author:  KY Liberty [ Fri May 29, 2009 10:10 pm ]
Post subject: 
A 100 hp shot of N2O was actually pretty entertaining in a Libby. Running a 2 second 60 ft and a 14 second quarter really surprised some people out at the track. It was by far the fastest Libby in the world at the time. It was a full 2 seconds faster than KB's supercharged Libby. Of course, that motor is sitting in my garage waiting for a rebuild. It won't have N2O on it again, but it will be bored and stroked. The current motor is waiting on the headers, high flow cats, and 206 cams, but unfortunately my Libby budget had to be moved to the firearms budget in case the current administration causes some problems. It's going to be next summer before the Libby budget is back in place.

If you're going to deal with the large blind spot the gauges cause, maybe transmission and oil temp would be a good choice.
Author:  nzoliver [ Sun Aug 09, 2009 4:50 am ]
Post subject: 
Hi from New Zealand!!
Does anyone know of a Version to go on the right hand pillar for us and Australia? :?

Thanks 8)
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/