ya linkage came loose, crawl up under there and put it back
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Transfer shift lever does nothing. http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=43777 |
Page 1 of 1 |
| Author: | simpleton [ Tue Jun 02, 2009 12:37 pm ] |
| Post subject: | Transfer shift lever does nothing. |
I have a 05 Liberty Sport and I have a problem with the transfer case shift lever. When I try and shift into 4 HI or 4 Low it does nothing. The lever has almost no resistance. Has anyone had any similar problems? Perhaps a problem with the linkage? The jeep came with the 7 year 70K powertrain warenty but I don't know that would cover this or if that warenty even still exists after the bailout. |
|
| Author: | JeepinJarhead03 [ Tue Jun 02, 2009 12:43 pm ] |
| Post subject: | |
ya linkage came loose, crawl up under there and put it back
|
|
| Author: | teckman02 [ Tue Jun 02, 2009 12:45 pm ] |
| Post subject: | |
i had this happen to me it was and it was replaced with no problem |
|
| Author: | simpleton [ Tue Jun 02, 2009 2:13 pm ] |
| Post subject: | |
teckman02 wrote: i had this happen to me it was and it was replaced with no problem
Replaced as in replaced the cable or replaced as in put back together? |
|
| Author: | tjkj2002 [ Tue Jun 02, 2009 2:21 pm ] |
| Post subject: | |
Well since your tax dollars are covering the warranty anyways I doubt it will get covered by a powertrain warranty that only covers internally lubricated parts which the shifter cable is not. Just save the headache and crawl under your jeep and check the t-case end,hook back up if it is not broken or replace the $50 cable that takes about 30mins to R&I. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|