| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Rancho RS9000xl's http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=44214 |
Page 1 of 1 |
| Author: | Fouros [ Mon Jun 15, 2009 11:40 pm ] |
| Post subject: | Rancho RS9000xl's |
well my rancho rsx's are getting long in the tooth and i am thinking about replacing them with the RS9000xl adjustables and maybe splurging for the myride remote tuning 
should be the same thing as the rsx's just use the rear shock for a durango shouldnt it 2x Rancho RS999764xl front struts 2 x Rancho RS999248xl rear shocks well thats my thinking feedback |
|
| Author: | STINGN [ Tue Jun 16, 2009 12:17 am ] |
| Post subject: | |
my brother had them for his wrangler he HATED THEM!!! tooooo stiff and they are really only meant for big truck for towing. |
|
| Author: | JeepinJarhead03 [ Tue Jun 16, 2009 12:52 am ] |
| Post subject: | |
thought that was the point of being able to adjust them tho? i did read on here that someone had gotten them and thought they were way too stiff though, was why i got the RSX's cause I wasn't going to buy the 300 dollar remote dooda |
|
| Author: | ChileanKJ [ Tue Jun 16, 2009 10:32 am ] |
| Post subject: | |
I have them 764 front and 248 rears, they are very good, is good to control the ride I have the CRD and a Daystar 2.5 and is too soft, I think the softness in my case is about the springs. |
|
| Author: | Fouros [ Tue Jun 16, 2009 7:38 pm ] |
| Post subject: | |
ChileanKJ wrote: I have them 764 front and 248 rears, they are very good, is good to control the ride I have the CRD and a Daystar 2.5 and is too soft, I think the softness in my case is about the springs.
have you got any photos of them installed and how and where you adjust them i am VERY interested in these Regards Fros |
|
| Author: | ChileanKJ [ Fri Jun 19, 2009 10:29 am ] |
| Post subject: | |
Ok these are the instalation photos, sorry about the photos quality, some AH broke in to my jeep and stole my Nikon D40X  so until I found anther I'm using a tiny kids camera  , the panel isn't good installed as I want to make a new plate for it and I have the old panel not the new digital controller, if you need something in special let me know and I take more images.
These is the panel: 
these is compressor on the engine bay 
Front 
rear 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|