| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| frankenlift uneven in the rear http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=44246 |
Page 1 of 1 |
| Author: | gsrtroy [ Tue Jun 16, 2009 6:26 pm ] |
| Post subject: | frankenlift uneven in the rear |
I just got my frankenlift on friday and i was measuring ride height and the passenger rear side was about a 1/2" higher than the other. the front struts were even. has anyone else had this problem, and will it eventually settle even?[/list] |
|
| Author: | KJ 119 [ Tue Jun 16, 2009 8:14 pm ] |
| Post subject: | |
My passenger side rear is a 1/2 inch higher,but I assumed it was because of the rear battery on driver side. Mabe not. |
|
| Author: | Rudy [ Tue Jun 16, 2009 9:24 pm ] |
| Post subject: | |
I hope it will settle even, I'm getting my frankie tomorrow. |
|
| Author: | Drassis [ Tue Jun 16, 2009 9:43 pm ] |
| Post subject: | |
mine came out even no problem like that |
|
| Author: | Rudy [ Thu Jun 18, 2009 10:36 am ] |
| Post subject: | Re: frankenlift uneven in the rear |
gsrtroy wrote: I just got my frankenlift on friday and i was measuring ride height and the passenger rear side was about a 1/2" higher than the other. the front struts were even. has anyone else had this problem, and will it eventually settle even?[/list]
Got my Frankie and it's even all around. Did you make sure that you were parked on level ground? |
|
| Author: | gsrtroy [ Thu Jun 18, 2009 4:35 pm ] |
| Post subject: | |
well i checked it in our shop on perfect ground and the driver's front an rear are of by about 1/2" so im hoping it will settle even, i have nothing in the jeep that could cause it to do this. |
|
| Author: | Cobalt-60 [ Thu Jun 18, 2009 4:52 pm ] |
| Post subject: | |
gsrtroy wrote: well i checked it in our shop on perfect ground and the driver's front an rear are of by about 1/2" so im hoping it will settle even, i have nothing in the jeep that could cause it to do this.
See what happens when it settles a little bit. Drive over some speed-bumps. I seem to remember that there were a pair of yellow OME "trim packers" in the box with my OME948 HD rear springs, but I can't seem to find them now... See: http://www.oldmanemu.com/store.html?pid=46 Could not tell you which one is the proper size though... I am NOT saying that these are the proper size, but they looked like these: http://www.quadratec.com/products/16090_601.htm |
|
| Author: | gsrtroy [ Thu Jun 18, 2009 5:00 pm ] |
| Post subject: | |
nope no trim packers came with the springs. im gonna let it sit for a while, its just weird that the drivers front and rear are of by 1/2". wouldn't this mean my jeep has more weight on the drivers side. i have no extra weight added to the jeep besides the subwoofer but i checked it with that out and it didn't change. |
|
| Author: | LIV42DY [ Sat Jun 20, 2009 10:19 pm ] |
| Post subject: | |
did you check the rear springs before you installed them to make sure they were both HD's? |
|
| Author: | sprsonic [ Sun Jun 21, 2009 12:22 am ] |
| Post subject: | |
my franky was about a half inch higher in the front for about a year, then settled to just under a quarter inch higher. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|