extra height in the rear

Quicksilversurf917 · **Posted:** Sat Jun 20, 2009 11:04 pm

Is it possible, safe, to take a OME MD or HD rear spring and put a 3/4in spacer under it? I have a friend who has some laying around and since my rear springs are starting to sag, I was going to go to OME MD or HD rears and leave the stock fronts for now. Would it be a possible fit or no?

daspes · **Posted:** Sat Jun 20, 2009 11:18 pm

Possible yes... But you want to keep an eye on your drive line angle and at you rear ball joint on the tri-link. It amy or may not be to much especially when flexed.

LIV42DY · **Posted:** Mon Jun 22, 2009 11:35 pm

Spacers should be installed on the top of the spring, going too high on the lower will cause the spring to pop out.

Hood297 · **Posted:** Tue Jun 23, 2009 1:14 pm

and if you go too high you will be rubbing your tires on the front of the fender flares. Too much lift on stock rear control arms will do that, you could get some longer ones if you really wanted to

Quicksilversurf917 · **Posted:** Tue Jun 23, 2009 1:48 pm

are there any other control arms you can get for the rear besides the JBA ones?

daspes · **Posted:** Tue Jun 23, 2009 7:48 pm

Quicksilversurf917 wrote:

are there any other control arms you can get for the rear besides the JBA ones?

Rubicon Express TJ arms are adjustable and bolt onto the KJ.

Quicksilversurf917 · **Posted:** Tue Jun 23, 2009 10:10 pm

What year would I have to get? Just the 05?

extra height in the rear

Who is online