| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| extra height in the rear http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=44373 |
Page 1 of 1 |
| Author: | Quicksilversurf917 [ Sat Jun 20, 2009 11:04 pm ] |
| Post subject: | extra height in the rear |
Is it possible, safe, to take a OME MD or HD rear spring and put a 3/4in spacer under it? I have a friend who has some laying around and since my rear springs are starting to sag, I was going to go to OME MD or HD rears and leave the stock fronts for now. Would it be a possible fit or no? |
|
| Author: | daspes [ Sat Jun 20, 2009 11:18 pm ] |
| Post subject: | |
Possible yes... But you want to keep an eye on your drive line angle and at you rear ball joint on the tri-link. It amy or may not be to much especially when flexed. |
|
| Author: | LIV42DY [ Mon Jun 22, 2009 11:35 pm ] |
| Post subject: | |
Spacers should be installed on the top of the spring, going too high on the lower will cause the spring to pop out. |
|
| Author: | Hood297 [ Tue Jun 23, 2009 1:14 pm ] |
| Post subject: | |
and if you go too high you will be rubbing your tires on the front of the fender flares. Too much lift on stock rear control arms will do that, you could get some longer ones if you really wanted to |
|
| Author: | Quicksilversurf917 [ Tue Jun 23, 2009 1:48 pm ] |
| Post subject: | |
are there any other control arms you can get for the rear besides the JBA ones? |
|
| Author: | daspes [ Tue Jun 23, 2009 7:48 pm ] |
| Post subject: | |
Quicksilversurf917 wrote: are there any other control arms you can get for the rear besides the JBA ones?
Rubicon Express TJ arms are adjustable and bolt onto the KJ. |
|
| Author: | Quicksilversurf917 [ Tue Jun 23, 2009 10:10 pm ] |
| Post subject: | |
What year would I have to get? Just the 05? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|