| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| HI-LIFT http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=45222 |
Page 1 of 2 |
| Author: | Terdl76 [ Wed Jul 22, 2009 2:46 pm ] |
| Post subject: | HI-LIFT |
i got a killer deal on a 42'' red cast hi-lift (20.00/ yardsale. went to home depot and fabed up a really nice mout, relized there is nowhere to use the thing on a kj  . so now what? is there any real reason to have one? i thought i had seen a couple of discussions on hi-lifts on this forum before, but why if you cant use them. or can you?
|
|
| Author: | callaway [ Wed Jul 22, 2009 2:52 pm ] |
| Post subject: | |
You'll need boulder bars ( or some other rock slider ) or a custom front/rear bumper to use the lift w/the hi-lift. |
|
| Author: | Terdl76 [ Wed Jul 22, 2009 2:59 pm ] |
| Post subject: | |
sweet, so all i have to do is spend a couple thousand dollars and i can use my 20 dollar jack. seriously though, thanks for the quick reply. if there are any other options let me know. |
|
| Author: | callaway [ Wed Jul 22, 2009 3:05 pm ] |
| Post subject: | |
Terdl76 wrote: sweet, so all i have to do is spend a couple thousand dollars and i can use my 20 dollar jack. seriously though, thanks for the quick reply. if there are any other options let me know.
boulder bars or similar sliders can be found for a few hundred bucks and, if you plan on doing any sort of off roading, should really be mandatory equipment for your vehicle |
|
| Author: | JL Rockies [ Wed Jul 22, 2009 3:37 pm ] |
| Post subject: | |
Hi lift sells hooks that grab the wheel spokes. |
|
| Author: | Terdl76 [ Wed Jul 22, 2009 3:44 pm ] |
| Post subject: | |
yeah i've seen that. how dose it work if the wheel your lifting is the one thats flat, carry a jack mount? |
|
| Author: | tumanator [ Wed Jul 22, 2009 4:03 pm ] |
| Post subject: | |
ok first off carrying a hi-lift is never a bad idea even if you can't use it. I've carried a good tow rope and a good set of jumper cables ever since i got my first truck. And to this day I've never had to use either for myself or my rigs, but they always seem to come in handy for someone else 
Plus a high lift can be rigged up as a winch in a pinch (love the rhyme) so carry a good rope that wont stretch much and it still may come in handy. *EDIT If you have front or rear hitch you may be able to stick the hi-lift in the hitch and jack away, though i imagine you may need to remove the spare tire to get to it. |
|
| Author: | JL Rockies [ Wed Jul 22, 2009 4:21 pm ] |
| Post subject: | |
Part of having an off-road vehicle is equipping it with not only skids and recovery points but places for your jack to work. My ARB bumper has a slot for the Hi Lift and I use the tire hooks along the edge of my RL rear bumper. Rock sliders are pretty automatic for off-road vehicles as well and make a good point. Takes money to look money. |
|
| Author: | bugnout [ Wed Jul 22, 2009 5:18 pm ] |
| Post subject: | |
You can jack using your hitch receiver, but without rockrails, there is no where else to lift. Go buy the wheel adapter. To use the wheel adapter you would also need to carry a jack stand. - Jack up using the wheel adapter - Put the jack stand in place - Lower to the jack stand. |
|
| Author: | SweepnChoke [ Wed Jul 22, 2009 5:19 pm ] |
| Post subject: | |
phxtoad's Hi-Lift adaptor design will solve your problem inexpensively. See link below. V V V V http://www.cardomain.com/ride/683398/7 |
|
| Author: | nosnorb_808 [ Wed Jul 22, 2009 9:18 pm ] |
| Post subject: | |
If you dont want it I will take that Hi-lift off your hands. Let me know... |
|
| Author: | oddball [ Wed Jul 22, 2009 9:42 pm ] |
| Post subject: | |
SweepnChoke wrote: phxtoad's Hi-Lift adaptor design will solve your problem inexpensively. See link below.
V V V V http://www.cardomain.com/ride/683398/7 Yeah, I was going to add that welding 4 mounting points to the frame side rails would be inexpensive. I like what you did there. |
|
| Author: | icarl [ Thu Jul 23, 2009 3:53 am ] |
| Post subject: | |
I have a hi-lift but to be honest have not found it to be to useful in the mud. It slips out on uneven ground. Even with the hi-lift base i have found it to be useless in mud. But the winch is king. |
|
| Author: | Terdl76 [ Fri Jul 24, 2009 8:22 am ] |
| Post subject: | |
thanks for all the ideas, think i'll go with rusty's sliders. |
|
| Author: | tommudd [ Fri Jul 24, 2009 8:41 am ] |
| Post subject: | |
if you are looking at sliders take the time to check out Rock Lizards and also Boulder Bars by AllJs |
|
| Author: | Terdl76 [ Fri Jul 24, 2009 12:26 pm ] |
| Post subject: | |
yeah, i've looked and the products look great. i really woud like to get the ones that have the extra tubeing for more protection/steprails. rusty's, rocklizard and rocky-road seem to be the only ones i can find in this style and rust'y seem to be about $50 cheaper. i'm not sure why, maybe the others are stronger? |
|
| Author: | icarl [ Fri Jul 24, 2009 2:41 pm ] |
| Post subject: | |
Terdl76 wrote: yeah, i've looked and the products look great. i really woud like to get the ones that have the extra tubeing for more protection/steprails. rusty's, rocklizard and rocky-road seem to be the only ones i can find in this style and rust'y seem to be about $50 cheaper. i'm not sure why, maybe the others are stronger?
I was looking on rusty's site and did not see anything for a kj with 'steprails'. I did find this, but that looks like an inferior design to rocklizard or even RRO. |
|
| Author: | Terdl76 [ Mon Jul 27, 2009 1:48 pm ] |
| Post subject: | |
scroll down. |
|
| Author: | 805gregg [ Tue Jul 28, 2009 8:30 pm ] |
| Post subject: | |
SweepnChoke wrote: phxtoad's Hi-Lift adaptor design will solve your problem inexpensively. See link below.
V V V V http://www.cardomain.com/ride/683398/7 I built one of those and it works perfect. |
|
| Author: | icarl [ Tue Jul 28, 2009 9:18 pm ] |
| Post subject: | |
Terdl76 wrote: scroll down.
I saw that but they don't tell you how much it is. Did you ask them for a price? |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|