It is currently Tue Oct 27, 2026 11:47 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 21 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Need some help with picking a lift kit
PostPosted: Fri Jul 24, 2009 12:38 am 
Offline
LOST Newbie

Joined: Thu Jul 23, 2009 5:30 pm
Posts: 4
Location: el paso, texas
Hi, I have a 2007 liberty and I want to lift it. I have never done this before, so I really dont know what I am looking for, so any help would be appreciated. I did go to the local 4wheel parts store and the guy there quoted me a price of $1200 for a 3.5" rockKrawler lift and a set of 5 BFG 31" tires. Is that too much? What about the brand on the lift, is it a good one? I have noticed on other threads others have gotten Old Man Emu lifts and seem to prefer those, whats the difference? Oh btw I dont know how much this stuff usually runs so I would really like the best bang for my buck.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jul 24, 2009 1:12 am 
Offline
Moderator
Moderator
User avatar

Joined: Thu Apr 05, 2007 11:54 pm
Posts: 2787
Location: Jacksonville, FL
First, welcome to LOST! :D

Installing a lift is pretty easy ( a little time consuming, but if you have a free afternoon your good). You just need basic hand tools, a jack and stands.

I wasn't even aware that RK still made a lift after there 7up debacle. If you are on a tight budget you can go with a spacer lift such as daystar, but the stock springs sag pretty quickly, so you won't gain a true 2.5". Almost everyone will recommend a full spring lift. Top ones out there are either the All J's Frankenlift (http://www.boulderbars.com), or the JBA lifts (http://www.jeepinbyal.com). You can piece together your own frankenlift style kit too with a little effort, but it doesn't come pre-assembled, which if you are going to do it yourself, complicates things a bit.

Do some reading on here, there is a lot of info on lift kits. Then ask questions to clarify any thing you are still fuzzy on.

_________________
- Mike
'12 JK

Jeep Tech Files


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jul 24, 2009 1:34 am 
Offline
LOST Newbie

Joined: Thu Jul 23, 2009 5:30 pm
Posts: 4
Location: el paso, texas
so then the rockkrawler one is no good? Now a full spring lift what is that? and usually how much do they run? I checked the links you gave and the JBA is about 700 and the Frankenlift starts at 850, is there anything out there that is comparable to those but cheaper? I'm not on a tight budget, but I was hoping not to spend more then 1500 for the lift and the tires, if thats do-able?


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jul 24, 2009 2:15 am 
Offline
Moderator
Moderator
User avatar

Joined: Thu Apr 05, 2007 11:54 pm
Posts: 2787
Location: Jacksonville, FL
sw1mm3r wrote:
so then the rockkrawler one is no good? Now a full spring lift what is that? and usually how much do they run? I checked the links you gave and the JBA is about 700 and the Frankenlift starts at 850, is there anything out there that is comparable to those but cheaper? I'm not on a tight budget, but I was hoping not to spend more then 1500 for the lift and the tires, if thats do-able?


There are three kinds of lifts: 1: Body lift (spacers between the frame and body, the KJ is unibody so thats out). 2: Spacer lift (spacers between your springs and the spring perch). 3: Spring lift (taller springs to give more more height, better because it replaces cheap saggy stock springs)

For the cost it depends exactly what you are looking for. You can do a Frankenlift and a full set of Treadwright MT's for 1250 plus shipping. Besides mounting and balancing for the tires, everything else can be done in the driveway. If you aren't comfortable tackling it yourself (it is pretty straight forward) hook up with some other LOST members in your area (not sure where that is your location is blank) for a lift party.

_________________
- Mike
'12 JK

Jeep Tech Files


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jul 24, 2009 2:28 am 
Offline
LOST Newbie

Joined: Thu Jul 23, 2009 5:30 pm
Posts: 4
Location: el paso, texas
srry i just created my account... I just filled in the location section.... Are spring spacers just like the spacer lift?


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jul 24, 2009 2:36 am 
Offline
Moderator
Moderator
User avatar

Joined: Thu Apr 05, 2007 11:54 pm
Posts: 2787
Location: Jacksonville, FL
sw1mm3r wrote:
srry i just created my account... I just filled in the location section.... Are spring spacers just like the spacer lift?


yes

_________________
- Mike
'12 JK

Jeep Tech Files


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jul 24, 2009 2:40 am 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
STAY AWAY FROM ROCK KRAWLER

If you want to go cheap you can go with a spacer lift like Daystar, its a good cheap lift, but if you want to do it right you should replace the front and rear shock with the spacer lift. The stock coils and shocks are good for ONLY 30,000/35,000 miles. The above will set you back about 425/450
Now for juust a little more you can do a full spring lift OME coils front and rear and rancho shocks for 650/700 and be good to go.
There has been a lot of people on here that went cheap and a year later their springs had sagged so bad and they went to either OME or the Frankenlift which uses OMEs

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jul 24, 2009 7:32 am 
Offline
Oilburner
Oilburner
User avatar

Joined: Fri Aug 31, 2007 9:54 am
Posts: 2788
Location: Barcelona Spain
If you have a couple of minutes....

http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=44037

_________________
Cherokee 2,5 CRD: sold - Wrangler TJ 2.5: gone - Touareg V10 TDI: new toy

Solo Liberty en Español: Jeepliberty.es


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jul 24, 2009 9:45 am 
Offline
LOST Member

Joined: Tue Sep 23, 2008 7:31 pm
Posts: 182
tommudd wrote:
STAY AWAY FROM ROCK KRAWLER

If you want to go cheap you can go with a spacer lift like Daystar, its a good cheap lift, but if you want to do it right you should replace the front and rear shock with the spacer lift. The stock coils and shocks are good for ONLY 30,000/35,000 miles. The above will set you back about 425/450
Now for juust a little more you can do a full spring lift OME coils front and rear and rancho shocks for 650/700 and be good to go.
There has been a lot of people on here that went cheap and a year later their springs had sagged so bad and they went to either OME or the Frankenlift which uses OMEs



Yup I did a revtek spacer lift. a year later upgraded to the Frankenlift 2 premium. Wish I had never done a spacer lift lol I hate doing things twice


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jul 24, 2009 11:26 am 
Offline
LOST Junkie
User avatar

Joined: Mon Jun 22, 2009 3:46 pm
Posts: 507
Location: Boone, NC / Charleston, SC
I'm always going to throw BDS out there :lol: . $475 online, doesn't come with front shocks. If you get it from a local dealer, the kit can be a lot cheaper. Then you can get some front Rancho's for maybe $180 shipped, so that route gets you a comparative lift to OME for about the same price. I didnt get Rancho's because the place I ordered from went out of business, so I had to use stock struts. I may replace them in the future.

Then, like was offered, Treadwright tires. I got 5 of them for $85 a piece, then it's about $25 shipping for each tire. So that's a total of $550.

So BDS and Treadwrights w/o front shocks is around $1025 shipped, and with front shocks around $1200 shipped.

_________________
2005 Patriot Blue Sport 3.7L 4WD
Alpine Headunit/2 12" Kenwood Subs/620 Watt Power Acoustik Amp
Teenage Driving/K&N Drop-In/MOPAR Tow Hooks & Skids/Debadged
BDS Coils/BDS 5500 Shocks/15x8 Cragar Soft 8's/31x10.5xR15 MTR
Teraflex Bumpstops/Rear Bumpstops/Trimmed Bumper

http://murphyman1.mybrute.com/


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jul 24, 2009 2:49 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Wed May 20, 2009 12:19 pm
Posts: 255
Location: The Village
tommudd wrote:
STAY AWAY FROM ROCK KRAWLER

If you want to go cheap you can go with a spacer lift like Daystar, its a good cheap lift, but if you want to do it right you should replace the front and rear shock with the spacer lift. The stock coils and shocks are good for ONLY 30,000/35,000 miles. The above will set you back about 425/450
Now for juust a little more you can do a full spring lift OME coils front and rear and rancho shocks for 650/700 and be good to go.
There has been a lot of people on here that went cheap and a year later their springs had sagged so bad and they went to either OME or the Frankenlift which uses OMEs


Hey Tom, to save time why don't you just put that info in your sig. :wink: :lol:

_________________
Car Domain
Jeep Liberty (KJ) - 2002


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jul 24, 2009 9:11 pm 
Offline
LOST Newbie
User avatar

Joined: Fri Jul 08, 2005 11:26 pm
Posts: 34
Location: Westminster, CO
I had never looked at the Rock Krawler lift before. Like some of you, I was around for the 7UP fiasco so never bothered to look at their stuff again.

Their 3 1/2" lift is certainly a different way of going about it though.
Don't think I like it though.

Check it out http://www.rockkrawler.com

_________________
2004 Liberty Sport, L.O.S.T. # 163
Renegade Lightbar, Jeep rack w/Hi-Lift, shovel and axe, Franken/jacker coil lift, LT245/75R16E BFG M/T TA's, All J & RRO skids and bars, all factory skids, FlowMaster 50, front DrawTite hitch w/Mile Marker winch, on-board air, JBA 4.5's, etc, etc.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jul 24, 2009 9:29 pm 
Offline
LOST Newbie

Joined: Thu Jul 23, 2009 5:30 pm
Posts: 4
Location: el paso, texas
what is the 7UP fiasco?

well I called today to ask the local 4wheel parts shop about other lift kits they had and they said the only other one they sell for the liberty was one by sky jacker heres the link ( http://www.4wheelparts.com/prodDetail.a ... parts=true ) can any one tell me if this is a good one?
Would changing the shocks do anything if i get the rock krawler one ( http://www.rockkrawler.com/index.php?r_intro=no )?

I think I will by the lift from 4wheel parts b/c I prefer for them to install it for me b/c I rather have someone who has done it before do it for me just b/c I dont wanna screw something up.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Aug 17, 2009 5:06 pm 
Offline
LOST Newbie

Joined: Tue Jun 23, 2009 6:19 pm
Posts: 3
Location: Tucson AZ
Murphyman wrote:
I'm always going to throw BDS out there :lol: . $475 online, doesn't come with front shocks. If you get it from a local dealer, the kit can be a lot cheaper. Then you can get some front Rancho's for maybe $180 shipped, so that route gets you a comparative lift to OME for about the same price. I didnt get Rancho's because the place I ordered from went out of business, so I had to use stock struts. I may replace them in the future.

Then, like was offered, Treadwright tires. I got 5 of them for $85 a piece, then it's about $25 shipping for each tire. So that's a total of $550.

So BDS and Treadwrights w/o front shocks is around $1025 shipped, and with front shocks around $1200 shipped.


4WD.com/4wheelparts.com uses the BDS components with the 4 springs and only back shocks...it is $450 now, and there is a 20% off coupon in 4wheeler magazine (4wlr909 or 4wlr0909) that you have to call in to get it to work. I got that for $397 or so shipped to my local store with tax, and used some amazon.com gift certificates to get the rsx17505 front struts. That 20% off code expires on 8-18, though, so be quick about it if you are going this route.

Ben

_________________
2006 4x4 M6
BDS/4wd.com lift with Rancho struts ordered.


Last edited by AZ-Ben on Mon Aug 17, 2009 6:06 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Mon Aug 17, 2009 5:43 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Apr 16, 2009 2:17 pm
Posts: 1334
Location: Cle Elum, Washington
Go Frankie or dont go!

_________________
2006 KJ CRD Ltd - Suncoast, GDE Eco, EGR Delete, After market T-Stat, Skid Row skids, V6 airbox, 2.5" Turbo back
2005 KJ CRD Sport-Suncoast, Transco, GDE Hot-GDE Trans, EGR Delete, Skid Row skids, V6 airbox, 2.5" Turbo back, After market S-Stat
1987 Suzuki LWB Samurai -diesel powered, custom 4 link coil suspension 38.5 SX Swampers


Top
 Profile  
 
 Post subject:
PostPosted: Mon Aug 17, 2009 5:44 pm 
Offline
Oilburner
Oilburner
User avatar

Joined: Fri Aug 31, 2007 9:54 am
Posts: 2788
Location: Barcelona Spain
sw1mm3r wrote:
what is the 7UP fiasco?


They tried to lift a libby 7". It was of poor design so it could only crawl to the mall.

sw1mm3r wrote:
well I called today to ask the local 4wheel parts shop about other lift kits they had and they said the only other one they sell for the liberty was one by sky jacker heres the link ( http://www.4wheelparts.com/prodDetail.a ... parts=true ) can any one tell me if this is a good one?


Yes that is a good lift although most people that used it noticed the front coils to start sagging quickly.

sw1mm3r wrote:
Would changing the shocks do anything if i get the rock krawler one ( http://www.rockkrawler.com/index.php?r_intro=no )?


You will notice a big difference over stock shocks, but if you don't extend the bumpstops too you'll be changing front shocks every month.

_________________
Cherokee 2,5 CRD: sold - Wrangler TJ 2.5: gone - Touareg V10 TDI: new toy

Solo Liberty en Español: Jeepliberty.es


Top
 Profile  
 
 Post subject:
PostPosted: Mon Aug 17, 2009 7:48 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Wed Nov 19, 2008 11:45 pm
Posts: 384
Location: Montana (Rocky Mountain Side)
Honestly, I have very little mechanical ability. Heck I usually don't understand half of what these guys are talkin about, but I was able to install the Frankenlift myself. It's actually fairly simple (albeit time consuming), and there's several write-ups on how to do it, if you just read through them, look at you jeep and match up pieces, then read again you'll pretty much get it.

BTW my vote again goes for the Frankenlift, it's just a superior quality lift IMHO.

_________________
05 o|||||||o Liberty 4x4 Patriot Blue w/Custom Black Trim
Kenwood Excellon KDC-X693 w/Alpine 500w AMP Bridged dual Alpine Subs
Frankenlift I w/Extra Isolator - ARB with Warn M8000
Goodyear Duratrac's 245/75/R16 on Cregar soft 8's, Full Skids


Top
 Profile  
 
 Post subject:
PostPosted: Mon Aug 17, 2009 7:53 pm 
Offline
Jeep-O-Caching
Jeep-O-Caching
User avatar

Joined: Fri Oct 05, 2007 6:41 am
Posts: 1815
Location: Northern Virginia
what ever happened to the " don't use a Franky unless you are going to have an ARB bumper and or winch" theory? I skipped the Franky and just went OME HD all around because I didn't want to mess up the CV's.

_________________
Jason
----------
Image


Top
 Profile  
 
 Post subject:
PostPosted: Mon Aug 17, 2009 8:08 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Wed Nov 19, 2008 11:45 pm
Posts: 384
Location: Montana (Rocky Mountain Side)
well unless i'm sadly mistaken (re measured today after a pretty rough go in the mountains) the front CV axles aren't having any trouble my franky.

22 1/2" on both front 22" on both back. I'm not runnin an arb or a winch (yet) and when i do the Arb i plan on lifting the clevis to compensate back to this amount.

_________________
05 o|||||||o Liberty 4x4 Patriot Blue w/Custom Black Trim
Kenwood Excellon KDC-X693 w/Alpine 500w AMP Bridged dual Alpine Subs
Frankenlift I w/Extra Isolator - ARB with Warn M8000
Goodyear Duratrac's 245/75/R16 on Cregar soft 8's, Full Skids


Last edited by tumanator on Mon Aug 17, 2009 9:03 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Mon Aug 17, 2009 8:51 pm 
Offline
Moderator
Moderator
User avatar

Joined: Thu Apr 05, 2007 11:54 pm
Posts: 2787
Location: Jacksonville, FL
DryBones wrote:
what ever happened to the " don't use a Franky unless you are going to have an ARB bumper and or winch" theory? I skipped the Franky and just went OME HD all around because I didn't want to mess up the CV's.


I've never heard that theory... The Franky is designed to work with stock CV's. I've even got a 3 ring clevis lift and CV's are fine with my Frankenlift.

_________________
- Mike
'12 JK

Jeep Tech Files


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 21 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com