| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Budget boost, home made. http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=45303 |
Page 1 of 2 |
| Author: | jeepetorp [ Sat Jul 25, 2009 4:59 am ] |
| Post subject: | Budget boost, home made. |
Plans, skiss and materiel is home. Work soon in progress. http://jeepetorp.blogg.se/2009/april/pu ... ll-kj.html 
Question: Do I need to compensate for the different angle on the rear axel? Or can the lift distanse materiel be symetric? I meen if the spring will behave strange... The front will have the lift distanse above the upper spring plate. That´s making the shock absorber to follow the lift. In the rear I think I will move up the shock absorbers lower point. |
|
| Author: | jeepetorp [ Sat Jul 25, 2009 7:20 pm ] |
| Post subject: | |
Going up... Anny time now... 
But this materiel is verry tough to work whith, I think this will take a little longer time than I´ve planed... |
|
| Author: | durangotang [ Sat Jul 25, 2009 7:47 pm ] |
| Post subject: | |
Be sure to get some extended bumpstops 
|
|
| Author: | daspes [ Sat Jul 25, 2009 8:08 pm ] |
| Post subject: | |
durangotang wrote: Be sure to get some extended bumpstops
Looking at the thickness of that spacer, I'm not sure how much those will help. |
|
| Author: | jeepkj02 [ Sat Jul 25, 2009 9:59 pm ] |
| Post subject: | |
FYI, on our IFS system you get double the lift from the thickness of the spacer. So on a 63mm thick spacer you will get 126mm of lift. (Approx. 5 inches of lift) |
|
| Author: | teckman02 [ Sat Jul 25, 2009 10:05 pm ] |
| Post subject: | |
man i wish that your blog was in english |
|
| Author: | Prospect62 [ Sat Jul 25, 2009 10:45 pm ] |
| Post subject: | |
Holy mother. |
|
| Author: | LIV42DY [ Sat Jul 25, 2009 11:06 pm ] |
| Post subject: | |
Overstacking,,,,here we go 
|
|
| Author: | jeepetorp [ Sun Jul 26, 2009 3:25 am ] |
| Post subject: | |
jeepkj02 wrote: FYI, on our IFS system you get double the lift from the thickness of the spacer.
So on a 63mm thick spacer you will get 126mm of lift. (Approx. 5 inches of lift) So what do jou mean? The front spacer would be 31,5 mm to lift the jeep 63 mm? If that´s so, I have to say THANK YOU!!! I´ve never though of that... Hmm. I think I will have to doo some calculating... Sad it was too long time ago sinse I went to scool... |
|
| Author: | jeepetorp [ Sun Jul 26, 2009 4:13 am ] |
| Post subject: | |
I did some practical tests. 
Of corse you´re right... 
A- Stock 485, lifted 2,5" = 517 mm. Spacer size 32 mm. The dive shaft angles, simulated 2,5" lift. Maybe i simulated too much lift, but I wanted to know if something would be strange. 
|
|
| Author: | ribbon [ Mon Jul 27, 2009 7:35 am ] |
| Post subject: | |
good luck with that... |
|
| Author: | tonycrd [ Mon Jul 27, 2009 7:58 am ] |
| Post subject: | |
Your CRD won't like you very much for fitting this type of OTT lift....OEM springs are pretty crappy already and with that puck on top of them they will sag...faster. You NEED to fit extended bumpstops now, since your front shock will bottom out if you don't. |
|
| Author: | jeepetorp [ Mon Jul 27, 2009 10:26 am ] |
| Post subject: | |
tonycrd wrote: Your CRD won't like you very much for fitting this type of OTT lift....OEM springs are pretty crappy already and with that puck on top of them they will sag...faster.
You NEED to fit extended bumpstops now, since your front shock will bottom out if you don't. I´ll do that. Somehow... If the springs wear out faster, I can easyer talk my wife into bying OME 2" lift...  (Don´t tell her)... 
|
|
| Author: | tommudd [ Mon Jul 27, 2009 10:29 am ] |
| Post subject: | |
not "if they wear out" just when, which will be sooner than later 
|
|
| Author: | jeepetorp [ Mon Jul 27, 2009 10:54 am ] |
| Post subject: | |
teckman02 wrote: man i wish that your blog was in english
Done. At least I tryed... |
|
| Author: | jeepetorp [ Sat Aug 01, 2009 8:37 am ] |
| Post subject: | |
A little bit more is done. One front spacer is ready, and the rear spacer in progress. 
The blogg will be updated as time goes by... |
|
| Author: | jeepetorp [ Sat Aug 01, 2009 4:23 pm ] |
| Post subject: | |
Rear end is done. 
|
|
| Author: | JeepinJarhead03 [ Sat Aug 01, 2009 5:53 pm ] |
| Post subject: | |
|
I did the rear on mine first too I had to drive it around like that for a week before the front items came in the mail Feels weird looking at the ground while driving doesn't it 
|
|
| Author: | Murphyman [ Sat Aug 01, 2009 5:58 pm ] |
| Post subject: | |
Building your own is quite impressive. And I'm sure it's a lot of fun too. Whenever I do something to my Jeep, it's usually a hassle. And then later, you can complain about how much of a hassle it was, when really it was fun. .
|
|
| Author: | 501 [ Sat Aug 01, 2009 8:40 pm ] |
| Post subject: | |
Any pictures of the rear pucks? |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|