LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Front Sway bar removal?
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=47402		 Page 1 of 1
Author:  jafstl38 [ Sun Oct 25, 2009 1:48 pm ]
Post subject:  Front Sway bar removal?
Im pretty sure my sway bar bushings are whats causing my hXc squeaking from the front since the weather has dropped at least 40 degrees. Is there a diagram out there on the easiest way to pull these bushings out and grease them up?
Author:  tommudd [ Sun Oct 25, 2009 2:40 pm ]
Post subject: 
no diagram needed 4 bolts , 2 per side nothing to it. Don't use grease it will eat the bushings, silicone spray works the best
Author:  jafstl38 [ Sun Oct 25, 2009 2:45 pm ]
Post subject: 
awesome thank you, man you answer all my questions! Im gonna stop paying my mechanic
Author:  501 [ Sun Oct 25, 2009 3:52 pm ]
Post subject: 
Tom will accept cash donations!
Author:  RAYMAN975 [ Sun Oct 25, 2009 6:18 pm ]
Post subject: 
or red loctite :P
Author:  oddball [ Sun Oct 25, 2009 8:53 pm ]
Post subject: 
Or PB Blaster. 8)
Author:  tommudd [ Sun Oct 25, 2009 9:00 pm ]
Post subject: 
All of the involved would be welcome for sure. Did an LJ lift yesterday and took a gallon of PB I think, stupid Ohio salt during the winter.
Red Loctite............have enough to last a lifetime, since I hate that stuff esp. when someone uses it on a lift....501???
Author:  2006 KJ [ Sun Oct 25, 2009 9:13 pm ]
Post subject: 
kinda off topic.. but i've found "Free All" to destroy PB blaster.. it's by far the best thing i've used to get off rusty bolts/nuts... just saying its worth a try if you see it at the store :)
Author:  tommudd [ Sun Oct 25, 2009 9:15 pm ]
Post subject: 
2006 KJ wrote:
kinda off topic.. but i've found "Free All" to destroy PB blaster.. it's by far the best thing i've used to get off rusty bolts/nuts... just saying its work a try if you see it at the store :)


Free All ??? have to check it out never seen it around?
Author:  501 [ Sun Oct 25, 2009 11:21 pm ]
Post subject: 
http://www.freealloil.com/

Wonder if it will remove red loctite?!?
Author:  jafstl38 [ Mon Oct 26, 2009 2:12 am ]
Post subject: 
could have used that today trying to get those 4 little bolts off of my sway bar, man i almost needed a torque wrench!?
Author:  NCC-1864 [ Thu Oct 29, 2009 11:55 am ]
Post subject: 
There is 100 Lbs of torque on these bolts AND you NEED a torque wrench to put it back.check your manual.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/