| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Brake Options http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=47782 |
Page 1 of 1 |
| Author: | pg2676 [ Wed Nov 11, 2009 1:35 pm ] |
| Post subject: | Brake Options |
I was parked beside a Nitro the other day and noticed that the brakes on it looked considerably larger than the discs on my KJ, especially the rear discs. My question is that assuming that the Nitro and KJ drivetrains and running gear are essentially clones, would brakes from a Nitro fit on my 03 KJ? What about the brakes from a Commander? |
|
| Author: | Hood297 [ Wed Nov 11, 2009 3:18 pm ] |
| Post subject: | |
you'd have to do some fancy work to move the caliper bracket further out if youre planning on going to a larger diameter rotor, which might also cause issues with wheel clearance if you have 16's |
|
| Author: | pg2676 [ Thu Nov 12, 2009 12:33 am ] |
| Post subject: | |
Hood297 wrote: you'd have to do some fancy work to move the caliper bracket further out if youre planning on going to a larger diameter rotor, which might also cause issues with wheel clearance if you have 16's
Got 17's with the stock 235/65 tires. Brakes have been a major issue since day one on this rig. I just had a rotation done and I'm going to need all new rotors and pads by spring. I occasionally tow a 3600-4000lb trailer, so I don't want to cheap out. |
|
| Author: | Jeepjeepster [ Thu Nov 12, 2009 12:49 am ] |
| Post subject: | |
How have brakes been a major issue? And that would be sweet if it was a direct swap for the calipers and rotors.. Something someone needs to spend some money on and let us know. |
|
| Author: | Atrus [ Fri Nov 13, 2009 12:14 am ] |
| Post subject: | |
Hood297 wrote: you'd have to do some fancy work to move the caliper bracket further out if youre planning on going to a larger diameter rotor, which might also cause issues with wheel clearance if you have 16's
Will a Nitro caliper bracket fit? I put Impala police package rotors and caliper brackets on my Grand Prix when I had it. IIRC, stock was 10.9" diameter rotors, Impala was 11.9 or something. Easy swap. I had about 1/8" of clearance between the caliper and the 16" wheel. Maybe the same would hold true here? |
|
| Author: | Hood297 [ Fri Nov 13, 2009 10:29 am ] |
| Post subject: | |
its possible, someone just needs to get one and try. do they have the 8.25" out back? |
|
| Author: | JEEPIN36COKK [ Fri Nov 13, 2009 11:21 am ] |
| Post subject: | |
Hood297 wrote: its possible, someone just needs to get one and try. do they have the 8.25" out back?
Yup, 08 and up KK and 07 up Nitros have 8.25 rear. |
|
| Author: | 04liberty [ Sat Nov 14, 2009 6:59 pm ] |
| Post subject: | |
I just looked at the 2 parts manuals, if the caliper bracket from a KA/KK will bolt to the KJ knuckle, then all should work. But someone has to spend the $$ to find out. |
|
| Author: | pg2676 [ Sat Nov 14, 2009 9:28 pm ] |
| Post subject: | |
Are the Nitro rotors actually larger, or is it just my eyes playing tricks? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|