I know this has ben covered on these forums.. but i can not find the link to it....

anyway when my buddy installed my DuraTracs .... he also decided that i needed some new sway bar bushings on the front... they were really loose and he did it at no charge. i guess my sway bar could move freely within the bishin itself.

anyway... after picking up my jeep from the shop.. new tires and all... i notice a rubbin sound that i did not here before. i pulled over and nothing was loose.

is it normal for new bushings to have to "break in"? or should i grease them or soemthing? i thought i read on here that someone did that.

thanks for the help everyone.


Josh

_________________
2003 Jeep Liberty Sport 4x4

245/75/16 Good Year DuraTracs, 2" BDS Suspension Kit with Rancho RSX17505 Struts in the front, Teraflex Extended Bumpstops, Daystar Extended Bumpstops, JBA 4.5 Gen Upper Control Arms

Westin Brush Guard, 2 Hella 500 Lights mounted

Spray some silicone lubricant in there and it should go away... pretty normal.

_________________
Former CRD owner... now I just sit around and stare at the wall.

thanks for the reply.... i bought some silicone spray... from Gunk... that should work right?

also how do i do it.. i mean what is the prefered way? all i did was just spray it on the bushing.. in the seam where there is a lil bit of an opening... was that right? or am i missing something?


thanks again

_________________
2003 Jeep Liberty Sport 4x4

245/75/16 Good Year DuraTracs, 2" BDS Suspension Kit with Rancho RSX17505 Struts in the front, Teraflex Extended Bumpstops, Daystar Extended Bumpstops, JBA 4.5 Gen Upper Control Arms

Westin Brush Guard, 2 Hella 500 Lights mounted

that will do it

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

thanks again.... i sprayed the silicone in the crack and hopefully that works...

how many times should i do this? or just keep spraying it untill the sound is gone?

_________________
2003 Jeep Liberty Sport 4x4

245/75/16 Good Year DuraTracs, 2" BDS Suspension Kit with Rancho RSX17505 Struts in the front, Teraflex Extended Bumpstops, Daystar Extended Bumpstops, JBA 4.5 Gen Upper Control Arms

Westin Brush Guard, 2 Hella 500 Lights mounted

I, pulled my swaybar off and link's and lubed rubber bushing's with diletric type greese and the bolt's and metal sleeves of the sway bar links with antisize, and seems to work great !!!

_________________
96 XJ with a lot of crap !!
04 KJ with some crap!!
15 Forester XT
14 STI Wagon
75 Cutlass "S"

I spray mine every oil change , bushings are still good and not one noise from my front end yet

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited