Good-day to All,

Hope all is Ok; please forgive my English, as I’m not very good at it.

I have a small issue and will be grateful for your help and input... I’ve ordered for 2 MOOG K3199 lower ball joints for my kj 2005 Reneged from Amazon (pix attached) and they've arrived but when I gave them to the mechanic for installation he said that they will not install as they will be touching the excel part due to the thick metal base it has.

Doe’s this make any sense, as I’m not a technical person. If it will help I also have the RRO ROCKFATHER DELUXE lift kit installed and it contains the following:


New Old Man Emu front custom springs.
Under-the-Top® strut cap and spacers for 3" leveling lift in front.
Old Man Emu front strut shocks.
Custom full height rear springs. Full height! Not small springs with a spacer included.
Rocky Road engineered rear shocks
Optional pre-assembly of the front struts.
INSANE ARMS upper A-arm control arms included.

Link to the RRO lift kit : http://www.rocky-road.com/kjrockfather.html


Many thanks for you help in advance,

You cross-posted this on another forum, there are people there looking for more info to give you an answer.

Many thanks the issue is now sorted, the problem is not the LB's but from the Mechanic.